kogan com KASBD150HA Dolby Atmos Soundbar User Guide

kogan com KASBD150HA Dolby Atmos Soundbar

Product Information

Mid Channel (58x90mm) – 30Wx1
Subwoofer – 30Wx2 + 3.5″
Frequency Range| 50Hz~20KHz
Signal-to-noise ratio (SNR)| >=70dB
Bluetooth Version| 5.3
Bluetooth Range| Up to 10m
Connections| USB, AUX in, Optical, Coaxial, HDMI IN, HDMI (eARC), AC IN
Power Supply| AC 100-240V
Dimensions| 1113x165x84mm

Product Usage Instructions

1. Ensure to read all instructions and warnings in the user guide before using the soundbar.
2. Retain the user guide for future reference.
3. Do not expose the soundbar to water or other liquids.
4. Control Panel:
   • Power/mode button: Use to turn the soundbar on/off and switch between modes.
   • Play/pause button: Use to pause/play media.
   • Next track button: Use to skip to the next track.
   • Previous track button: Use to go back to the previous track.
   • Volume dial: Use to adjust the volume.
5. Ports:
   • HDMI (eARC): Enhanced Audio Return Channel for transmitting full-resolution audio signals through an HDMI cable (not provided).
   • HDMI IN: Use to connect compatible devices (e.g., TV box, DVD) using an HDMI cable.
   • USB IN: Use to connect a flash drive for direct media playback (FAT32 format and 64GB max).
   • COAXIAL IN: Use to connect compatible devices using a coaxial cable (not provided).
   • OPTICAL IN: Use to connect compatible devices using an optical cable (not provided).
   • AC IN: Use to connect the soundbar to a power supply.
   • ON/OFF: Use to turn the soundbar on/off.
6. Remote:
   • Power button: Use to turn the soundbar on/off.
   • Volume increase/decrease buttons: Use to adjust the volume.
   • Previous button: Use to go back to the previous track.
   • Next button: Use to skip to the next track.
   • EQ button: Use to adjust the equalizer settings.
   • Mode button: Use to switch between different modes.
   • Bluetooth button: Press and hold to disconnect the Bluetooth connection. Short press to switch to BT mode.
   • Bass increase/decrease buttons: Use to adjust the bass level.
   • Treble increase/decrease buttons: Use to adjust the treble level.
   • 3D button: Use to enable/disable 3D audio effects.
   • Mute button: Use to mute/unmute the soundbar.
   • Play/pause button: Use to pause/play media.
   • Repeat button: Use to enable/disable repeat mode.
7. LED Display:
   • HDMI: Indicates HDMI mode.
   • BT: Indicates Bluetooth mode.
   • USB: Indicates USB media mode.
   • AUX: Indicates Auxiliary input mode.
   • OPT: Indicates Optical mode.
   • EARC/ARC: Indicates HDMI ARC mode.
   • COAX: Indicates Coaxial mode.
   • Red LED: Indicates standby mode.
8. Using Dolby Atmos:
9. Ensure that the connected device and content support Dolby Atmos.
10. Set the audio format on the connected device (e.g., Blu-ray player, TV) to either Bitstream, Auto, or Bypass to skip the encoding process. This allows the soundbar to receive the the-decoded audio signal.

Note : Dolby Atmos is only available in HDMI IN and HDMI eARC modes.
For more information and assistance, visit help.kogan.com

SAFETY & WARNINGS

Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference.

• Do not place the soundbar in wet or high-temperature areas.

• Do not place the soundbar in humid areas.

• Do not place the soundbar under direct sunlight.

• Do not attempt to disassemble the soundbar yourself.

• Do not allow any particles or liquids to fall into the soundbar. If any falls, cut off the power supply immediately. Cease use and contact help.Kogan.com for support.

• In the case occurrence of malfunction, do not attempt to repair the unit on your own.
  Contact help.Kogan.com for support.

• Don’t install the unit in or near a place where it may come in contact with rain, moisture or other liquids.

OVERVIEW

Control Panel

Power/mode button

| ·   Short press to turn the soundbar on/switch modes.

·   Long press to turn the soundsbar off

Play/pause button| Used to play/pause tracks
Next track button| Short press the button to play the next track.
Previous track button| Short press the button to play the previous track.
Volume dial| ·   Rotate clockwise to increase volume.

·   Rotate counter-clockwise to decrease volume.

Ports

1. HDMI (eARC): Enhanced Audio Return Channel, enables you to transmit the original full resolution audio signal through an HDMI cable (not provided).
2. HDMI IN: Use to connect compatible devices (e.g. TV box, DVD) using a HDMI cable.
3. USB IN: Use to connect a flash drive for direct media playback (FAT32 format and 64GB max).
4. AUX IN: Use to connect compatible devices using the 3.5mm – 3.5mm stereo jackcable (provided).
5. COAXIAL IN: Use to connect compatible devices using a coaxial cable (not provided).
6. OPTICAL IN: Use to connect compatible devices using an optical cable (notprovided).
7. AC IN: Use to connect the soundbar to a power supply.
8. ON/OFF: Use to turn the soundbar on/off.

Remote

LED Display

1. HDMI: HDMI mode
2. BT: Bluetooth mode
3. USB: USB media mode
4. AUX: Auxiliary input mode
5. OPT: Optical mode
6. EARC/ARC: HDMI ARC mode
7. COAX: Coaxial mode
8. Red LED: Standby

OPERATION

• Power on/off: Press the Power on/off button on the remote control or soundbar control panel to turn the unit on and off.

• HDMI IN: Connect a compatible device (e.g. TV box, DVD) to the HDMI IN port on the soundbar using an HDMI cable and connect a TV to the HDMI eARC port on the soundbar using a HDMI cable. Select HDMI mode by pressing the MODE button on the remote control or soundbar control panel until HDMI is displayed on the LED display. Adjust the volume of soundbar by pressing the Volume up and Volume down buttons on the remote control or soundbar control panel.

• HDMI (eARC): Connect a HDMI ARC/eARC compatible TV to the HDMI ARC/eARC port on the soundbar using a HDMI cable. Select ARC/eARC mode by pressing the MODE button on your remote control or on the soundbar control panel until
  ARC/eARC is displayed on the LED display. Ensure HDMI ARC is selected as the TV’s audio output, then adjust the volume of soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.

• AUX in: Connect a compatible device using the 3.5mm – 3.5mm stereo jack cable. Select AUX mode either by pressing the MODE button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until AUX is displayed on the LED display. Ensure the connected device is producing an audio signal, then adjust the volume of soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.

• Optical in: Connect a compatible device to the OPTICAL input on the soundbar using a digital optical cable (not supplied). Select OPT mode either by pressing the MODE button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until OPT is displayed on the LED display. Ensure Optical SPDIF or External device output is selected as the TV’s audio output, then adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.

• Coaxial in: Connect a compatible device to the COAXIAL input on the soundbar using a digital coaxial cable (not supplied). Select COAX mode by repeatedly pressing the MODE button on the soundbar control panel until COA is displayed on the LED display. Ensure Coaxial or External device output is selected as the TV’s audio output, then adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.

• Bluetooth: Short press the MODE button on the remote control or repeatedly press the MODE button on the soundbar control panel until BT is shown on the LED display. The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure that the device you wish to connect is also in pairing mode and search for
  “Kogan Atmos 150” in its device list. When the two devices are paired, the LED display on the soundbar will stop flashing and remain constant. (The soundbar will now automatically re-pair with this device whenever it is within range and has Bluetooth turned on.) Once paired, the remote control can be used to play, pause, and navigate between tracks on compatible iOS and Android devices.
  Note:
  Hold the BT button on the remote control to disconnect the Bluetooth connection between the phone and the soundbar; short press to switch to BT mode.

• USB media mode: The soundbar is compatible with USB flash drives of up to 64GB in size and can play audio files directly. Insert a compatible drive into the USB port on the back of the soundbar and press the mode button on the soundbar or remote control to change the soundbar to USB mode. The media controls on the remote control can be used to play, pause and navigate between tracks on the flash drive and the LED display will indicate the current track time.
  USB repeat mode (also accessed via the remote control) enables single-track repeat (ONE), all track repeat (ALL).
  The media player also has a memory function that will recall and continue from the last played point when a USB flash drive that has previously been used with the soundbar is reinserted.

• Equalizer modes: The soundbar has three equalizer default settings which are tailored to different music styles. Press the EQ button on the remote control to choose between Music mode (EQ1), Movie mode (EQ2), and News mode (EQ3).

Using DOLBY ATMOS

1. Ensure the connected device and the content supports Dolby Atmos.
2. Set the audio format on the connected device (for example, Blu-ray player, TV) to either “Bitstream”, “Auto” or “Bypass” to skip the encoding process. This allows the soundbar to receive the non-decoded audio signal.

Note:
Dolby Atmos is only available in HDMI IN and HDMI eARC modes.

SPECIFICATIONS

• Audio output 150W RMS
• Speaker drivers
• L/R Channel (58x90mm) 30Wx2 + 2.5”
• Sky Channel 30Wx2
• Mid Channel (58x90mm) 30Wx1 + 3.5″ woofer 30Wx2
• Frequency 50Hz~20KHz
• SNR >=70dB
• Bluetooth version 5.3
• Bluetooth range Up to 10m
• Connections USB, AUX in, Optical, Coaxial, HDMI IN, HDMI (eARC), AC IN
• Power supply AC 100-240V
• Dimensions 1113x165x84mm

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>