steelseries APEX 9 TKL PIG Gaming Keyboard User Guide
- June 13, 2024
- SteelSeries
Table of Contents
Steelseries APEX 9 TKL PIG Gaming Keyboard
GENERAL
PACKAGE CONTENTS
- Apex 9 TKL Keyboard
- Detachable Braided USB-C to USB-A Cable Keycap Puller
SYSTEM COMPATIBILITY
- PC
- Mac
- Xbox
- PlayStation
SOFTWARE
Use Engine inside SteelSeries GG to customize your lighting, macros and more also has other amazing apps like Moments, which makes it easier and faster to clip and share highlights with friends.
DOWNLOAD NOW
steelseri.es/gg
PRODUCT OVERVIEW
KEYBOARD
-
Multimedia Volume Roller
-
Multimedia Key
-
SteelSeries Function Key Profile
-
Switching Key
-
On-the-fly Macro
-
Recording Key
-
Illumination Brightness Keys USB-CJack
-
Tri-Level Feet
-
Keycap Puller Socket
ACCESSORIES -
USB-C to USB-A Cable
-
Keycap Puller (located on bottom of keyboard)
SETUP
CONNECTION
FUNCTIONS
OPTIPOINT 2-POINT ACTUATION
Press the Stee/Series Function Key (3) + (0) to enable Gaming Mode, the
number 1 will light up. Press the Stee/Series Function Key (3) + (I) to enable
Typing Mode, the number 2 will light up.
PROFILE SWITCHING
Press the SteelSeries Function Key (3) + Profile Switching Key (4) repeatedly to cycle through the profiles.
ON-THE-FLY MACRO RECORDING
- Press and hold the SteelSeries Function Key (3) + On-the-fly
- Macro Recording Key (5) for 2 seconds to start recording.
- Type your desired key combinations.
- Press the SteelSeries Function Key (3) + On-the-fly
- Macro Recording Key (5) to end Macro Recording.
- The On-the-fly Macro Recording Key (5) will now be flashing, press the key you want to assign the Macro to.
ILLUMINATION BRIGHTNESS CONTROL
- Press the Stee/Series Function Key (3) + Illumination
- Brightness Key (Down) (6) to reduce Illumination Brightness.
- Press the Stee/Series Function Key (3) + Illumination
- Brightness Key (Up) (6) to increase Illumination Brightness.
MULTIMEDIA CONTROLS
- Multimedia Volume Roller (1)
- Volume Up
- Volume Down
- Mute / Unmute Toggle
Multimedia Key (2)
- Play /Pause
- Forward /Skip Track
- Back /Previous Track
- Scroll Wheel Up
- Scroll Wheel Down
- Press Wheel
- Single Press
- Double Press
- Triple Press
CUSTOMIZE YOUR KEYBOARD SWAPPABLE KEYCAPS
Each Keycap on the Apex 9 TKL can be removed and replaced. Use the Keycap Puller (11) located on the bottom of your Keyboard to easily pull off each Keycap. Replacement and additional designer Keycap sets are available for purchase on steelseries.com
SWAPPABLE SWITCHES
Each Switch on the Apex 9 TKL can be removed and replaced. Switch Puller is not included. Additional Switch sets and Switch Pullers are available for purchase on steelseries.com.
REGULATORY
Europe – eu uccaration or contormin 20 (2015/865/EU). EMC Directive
(2014/30/EU), and LVD (2014/35/EU) which ere issued by the Commission of the
European Community. The full text of the EU deciaration of conformity is
avalsble at the following internet address.based on the feedback from our
supplers incloates that our products shipping to the EU territory comply with
REACH (Registration. Evaluation fully committed to offering REACH compliance
on the products and posting accurste REACH UK CA UK Declaration of Conformity
and The Rastriction of the Use of Certain Hazardous Substances in Electrical
and Electronic
WEEE
This product must not be disposed of with your other household waste or treat
them in complianos with the local regulstions or contact your locsi city
office. your househoid waste dsposel service or the shop where you purchesed
the product.
Turkey RoHS Compliance
Republic of Turkey: In conformity with the EEE Regulstion
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FOC Rules. Operation is subject to the folowing two This dense may nat coure hort interterense. and undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in acoordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ooour in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Statement
This device complies with RS standards of the Industry Canada Rules. Operation
is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- This Class B digital apparatus complies with Canadian ICES-003.
Restriction on Hazardous Substances statement (India)
This product complies with the “India E-waste Rule 2011” and prohibits use of
lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for
cadmium, except for the exemptions set in Schedule 2 of the Rule. The RoHS
test method is based on the standards JIS C 0950 and CNS 15663.
Note 1
“Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage
content of the rostricted suhstanco excoads the roforenco norcontage value of
proconco condition.
Note 2
indicates that the percentage content of the restricted substance does not
exceed the percentage of reference value of presence.
Note 3
indicates that the restricted substance corresponds to the exemption
More information and support from steelseries.com
EAC
Oustom Union Compliance.
ACMA Compliance
(Australa/ Now Zealand)
Direct Current
- Product Name (R&14/* 8415)
- Model No. (138/1 5):
- Rated (19218/19018):
- Made in China (*1259/# 11#035)
- Operating Temperature: 0 to + 40 °C
- R#BI18:919:0-4019
- Keyboard ($EAR/SEAR)
- KB21 5V= 600mA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>