RICE LAKE OIML Class III Healthweigh Indicators Instructions
- June 13, 2024
- RICE LAKE
Table of Contents
RICE LAKE OIML Class III Healthweigh Indicators Instructions
Disabling Calibration Message
Product: Healthweigh Indicator OIML Class III
Issue: Unwanted calibration prompt
Solution: Set next verification date (MONT) to 0
Manuals are available from Rice Lake Weighing Systems at
www.ricelake.com/manuals
Warranty information is available at
www.ricelake.com/warranties
Figure 1. Healthweigh Indicator Display
A CNTL message may appear on an OIML Class III indicator to alert the user
that it is time for a calibration. Use the following procedure to disable the
CNTL calibration message
- Power on the indicator.
- Immediately hold the ENTER button for three seconds until firmware ID number flashes.
- Press the BMI button. Verification menu displays.
- Press ENTER to access Verification menu.
- Press ENTER to access MONT parameter.
- Use the BMI and arrow buttons to set the MONT parameter to 0.
- Press Enter two times to save.
- Press Enter to select DONE. Scale will reboot after three seconds.
NOTE: The CNTL reminder is disabled after the procedure is complete. Menu may still continue to display 11 in the MONT parameter after successful procedure.
© Rice Lake Weighing Systems Content subject to change without notice
230 W. Coleman St. • Rice Lake, WI 54868 • USA USA:
800-472-6703 • International:
+1-715-234-9171
