Shenzhen Futouch Science Technology HC-03 Wireless charger warm cup User Manual

June 5, 2024
Shenzhen Futouch Science Technology

User Manual
Wireless charger warm cup

Model No. :HC-03
Please read the instructions carefully before using this product! This product is
household use only.

Package Contents

  1. Wireless charger
  2. Adapter
  3. Power cord
  4. Glass cup
  5. Silicone cup cover

Important Safeguards

  1. Do not disassemble or modify this product yourself.
  2. Keep the charger and receiver away from water and other liquids.
  3. To clean the charger, make sure that no power is plugged in.
  4. The ambient temperature is maintained at 0-45 ° C
  5. It is forbidden to place metal materials such as coins and keys or magnetic materials such as bank cards on the charger, which will affect normal work.
  6. The cups can only be hand-washed, not for microwave/dishwasher/oven.

Wireless cup warmer instructions

Wireless charger instructions

Place the phone in the middle of the wireless charger and the breathing light flashes to the charging state.

Specifications (1 )

Name: Wireless Charger
Input: 12V/1.5A
Charging output: 5V/1A 9V/1.2A 12V/1.5A
Transmission distance: less than 6mm
Charging efficiency: about 80%

LED indicator Phenomenon description
The light flashes three times The wireless charger is turned on
The light is not bright Standby mode
In the state of breathing light Power transmission
Flashing lights The location is not in place or security is activated

Applicable equipment

  1. Built-in wireless charging receiver (iphone8, iPhone, Samsung S6, etc.),
  2. Equipment with a protective cover for the receiving device (iphone7 series, etc.)

Note: These receivers must comply with the WPCQI standard for compatibility
Note: The wireless charger is equipped with a “wireless charging and heating adaptive switch”, which can effectively prevent metal objects or mobile phones from being heated and further prevent damage to the mobile phone or burning the user, and the heat preservation cup can be automatically switched to Heating function.

Specifications (2)
Name: Wireless Charger
Heating power: 15W
CUP CAPACITY: ABOUT 350ML
Keep warm: about 50℃ / 122℉ (more suitable for human drinking water )
Material: glass cup
Heating method: wireless induction heating

LED indicator Phenomenon description
The light flashes three times The cup warmer is turned on
The light is not bright Standby mode / not powered on / not used for more

than 8 hours
In the state of breathing light| Heating/charging
Flashing lights| The location is not in place or security is activated

Note: Entering standby mode after 8 hours of heat preservation.
Note: The bottom of the mug is made of special materials. The mug is placed on the
base and heated by electromagnetic induction. The ordinary cup is not compatible and cannot be heated.

Care and Cleaning

  1. Wipe the adapter, data cable, and charging stand with a rag or paper towel. Never enter the water.
  2. Please clean the cup manually, do not use the dishwasher.
  3. The cup can be dried and disinfected in 150℃ / 302℉, but it can’t be placed in a microwave oven or heated in the oven.

Troubleshooting

Problem Possible causes What to do
No power The grid is out of power Change the power socket
No power The power cord plug is not in place Put the power cord plug in

place
No power| The adapter or power cord is broken| Replace
No power| The charging block circuit is bad| Contact the dealer
Flashing light| The appliance is not in place| Put the appliance in place
Flashing light| The cup is heated for more than 8 hours| Pick up the cup and put it back in the cradle

Warranty

Thank you for purchasing our product, which has been made to meet high-quality standards. The manufacturer’s warranty covers the product for a period of 12 months from the date of purchase against manufacturing faults.

Warranty Card
Article:………………….
Model:…………………
Owner’s Name:…………………..
Address:…………………..
Tel:…………………………….
Purchase Date:………………………………
Dealer’s Name&Stamp:…………………
Address:………………..
Tel:…………………………

Please fill in this table and email it within 10 days from the date of purchase. Due to continuous product improvement, we reserve the right to change the product specification without prior notice.

FCC Statement

This device complies with part 18 of the FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Increase the separation between the equipment and any other radio device.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals