Lian Li A4-H2O Aluminum Mini-ITX Computer Case User Manual
- June 13, 2024
- LIAN LI
Table of Contents
Lian Li A4-H2O Aluminum Mini-ITX Computer Case
Product information
- The A4-H2O is a computer case designed for optimal cooling performance. It features side panels and top air vents that should not be covered by other objects to ensure proper airflow. The case must be placed in a free-standing position to maximize cooling efficiency and should have a minimum distance of 15 cm between it and surrounding objects. It is not recommended to use the case in enclosed spaces. The plastic shield inside the case should not be removed for safety purposes.
- The case is compliant with the WEEE directive in European countries, which means it should not be disposed of as household waste. It should either be returned to DAN Cases or disposed of at designated electronic waste collection points.
- Modifications to the case or its parts, incorrect or negligent handling of the product, manipulation or removal of the serial number, or damages from Force Majeure will void the warranty. Lian Li, the manufacturer, is not liable for damage to built-in hardware due to improper handling. It is recommended to visit the DAN Cases website to confirm compatibility between your components and the case.
Product Usage Instructions
-
Before working inside the case, ensure that every component is free of electricity.
-
When tightening screws, make sure they are aligned at a right angle towards the screw thread to prevent damaging the thread.
Assembly Instructions
- Follow the assembly instructions provided in sections 6 to 20 of the user manual.
- Use the specified screw types mentioned in section 5 for each step of the assembly process.
- Connect or route the I/O cables as shown in section 6.
- Connect or route the power cables as shown in section 7.
For further support or inquiries, please visit www.dan- cases.com/dana4.php . or contact rma@dan-cases.com.
- Thank you for purchasing the A4-H2O. Please read the following instructions.
- If you are missing any parts or have other issues with the case, please contact us.
warranty
Operating Guidelines
- Both side panels and the top air vents of the case should not be covered by other objects. To ensure adequate cooling performance, the case must be placed free-standing. Utilization in enclosed spaces is not supported.
- The case must have a minimum distance of 15 cm between it and surrounding objects. For safety, do not remove the plastic shield inside the case.
WEE:
- In European countries where the WEEE directive applies, do not dispose of the case or any contained components as household waste. Please only dispose of the case at designated electronic waste collection points, or return it to DAN Cases.
Warranty:
- Any modifications to the case or its parts will void your warranty. This also applies to the incorrect or negligent handling of the product. Any manipulation or removal of the serial number or damages from Force Majeure shall also void the warranty.
Responsibility:
- Lian Li is not liable for damage to the built-in hardware due to improper handling.
- Please visit www.dan-cases.com to confirm that your components are compatible with the case.
Packing:
- This box (packaging) is recyclable. Please recycle according to local regulations.
advice
- Take all the time you need for your build.
- Make sure that every component is free of electricity before working inside the case.
- Make sure that you ground yourself to avoid damaging a component with electrostatic discharge.
- To prevent damaging components and screw threads, use a minimum of force for mounting components and tightening screws.
- Use a Phillips cross-head screwdriver for all screws inside the case.
- Make sure that while you are tightening a screw, it is aligned at a right angle towards the screw thread to prevent damaging the thread.
screw types
- 6-32 Power Supply Screw 4 x included in the screw bag
- M3 Hard Drive Screw pre-installed at the case
- 6-32 Countersunk Screw pre-installed at the case
- M3 Motherboard Screw 4x included in the screw bag
- Thumb Screw pre-installed at the case
assembly
Set the power switch to ON
Connect or route the following I/O cables
Connect or route the following power cables
Compatibility Warranty
- www.dan-cases.com/dana4.php
- rma@dan-cases.com
- © DAN Cases & Lian Li, All Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>