Capitol Flooring Products 110012 3-8-in Leg x 3-8-in Round Crown Steel Gray 20-Gauge Flooring Staples Instructions
- June 13, 2024
- Capitol Flooring Products
Table of Contents
Capitol Flooring Products 110012 3-8-in Leg x 3-8-in Round Crown Steel
Gray 20-Gauge Flooring Staples
Product Information
- Product Name: Galvanized Point Staples
- Model Numbers: 110012 / 110013
- Staple Type: Galvanized
- Crown Size: 3/8 inch
- Leg Size: 3/8 inch (for model 110012) / 9/16 inch (for model 110013)
- Staple Shape: Chisel-Point
- Application: Ideal for wood flooring, vinyl tile, linoleum,felt, and wood
- Staples per Box: 5000
- Manufacturer: Capitol Flooring Products
- Website: www.capitolflooringproducts.com
Product Usage Instructions
To use the Galvanized Point Staples, please follow the steps below:
- Select the appropriate model number based on your project requirements. Model 110012 has a leg size of 3/8 inch, while model 110013 has a leg size of 9/16 inch.
- Ensure that the surface you are working on is suitable for staple installation. These staples are designed to be used on wood flooring, vinyl tile, linoleum, felt, and wood.
- Load the staples into your compatible staple gun or stapler. Each box contains 5000 staples.
- Position the staple gun or stapler at a suitable angle to the surface you are stapling. Make sure the chisel-point end of the staple is facing downwards towards the surface.
- Apply steady pressure on the staple gun trigger or handle to drive the staples into the material. The chisel-point design allows for easy penetration.
- Repeat the process until you have secured all the desired areas with staples.
- Dispose of any unused staples properly and store the remaining ones in a dry and secure location for future use.
If you encounter any issues or have further questions, refer to the product manual or contact Capitol Flooring Products directly through their website.
PRODUCT INFORMATION
GALVANIZED
3/8″ crown staples with a 3/8″ leg
CHISEL-POINT
V-shaped to drive easily Zinto wood fooring
DIVERGENT
3/16″ crown staples with a 9/16″ leg
CHISEL-POINT
Easily penetrate vinyl tile,linoleum, felt and wood
Capitol® Galvanized Chisel-Point 3/8″ Staples provide jam-proof efficiency with V-shaped points that drive easily into most wood floors.
Capitol® Divergent Chisel-Point 9/16″ Staples easily penetrate vinyl tile, linoleum, felt and wood (including hardwoods) with 60° points. They provide added holding power when staple legs veer in opposite direction.
Performance. Quality. Pride.
www.capitolflooringproducts.com