LIAN LI UF-SL120V2-3B RGB Black 3x 12cm Fan Pack with Controller Installation Guide

LIAN LI UF-SL120V2-3B RGB Black 3x 12cm Fan Pack with Controller

Package Contents

Power Cable Installation

Note

1. The socket for the power cable modular is directional, which shall connect the male-female plug and cover the pins.
2. The pulling connector mechanism is designed to not loosen easily.

Fan to Fan Connection

Daisy Chain Extension Cable Connection

Note! Each connector from the controller can connect maximum 6 fans, no limited quantity for Group A or B.

Controller Cable Connection

Fan Mounting on Raditor

Note

1. The fan interlocking key is removable if it is affected by the ! radiator inlet and outlet.
2. Implementing counterbore screw holes to fit standard long screws,do not use gaskets when mounting with long screws.
3. Only use the screws(M5x10) that is included in the box, other screws may not hold the fan properly.

Use of Magnetic Adhesive Pad

Restriction of Controller

Maximum output of controller when connected BOTH SATA 15 PIN cable:

1. The maximum total output of the controller supports up to 29 W, do not connect more than 16 fans to the controller.
2. Use L-Connect 3 to set static white, please lower the brightness.
3. When sync to motherboard and set as 100% brightness of static white, the controller supports up to 8 UNI FAN SL V2.
4. Each SM type port supports up to 5 W.( SYNC 2 port syncs to the lighting effect of port 2; SYNC 4 port syncs to the lighting effect of port 4)．

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>