LIAN LI G50.LAN20.00 Lancool 2 Black Tempered Glass ATX Case Installation Guide

: June 12, 2024
: LIAN LI

Table of Contents

LIAN LI G50.LAN20.00 Lancool 2 Black Tempered Glass ATX Case
Product Information
Product Usage Instructions
Case components
Hardware list
Motherboard installation
LED control installation
Radiator & cooling support
Hardware clearance
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LIAN LI G50.LAN20.00 Lancool 2 Black Tempered Glass ATX Case

Product Information

The product is called LANCOOL II and it is designed to perform at a high level. It features a removable HDD tray that can support 2.5 SSD x 2. The package includes various screws for motherboard and SSD mounting, screws for PSU mounting, screws for HDD mounting, cable ties for cable management, screws and anti-vibration rings for SSD mounting, a tool for stand off bolt, screws for a 120 mm fan, and Velcro for cable management. The product also has a front panel that can be removed, side panels that can be opened, a tool for removing stand off bolt, and the ability to install an E-ATX motherboard. It supports the installation of 2.5 SSDs and 3.5 HDDs, and the HDD rack position can be adjusted. It has an audio/microphone combo jack and a fan tray that can be released by loosening the screws on both sides. The product also supports radiator and cooling systems of different sizes.

Product Usage Instructions

To use the LANCOOL II product, follow these steps:

Remove the front panel and then open the side panels.
To release the side panel, move it up.
Install the E-ATX motherboard by turning it 180 degrees.
For 2.5 SSD and 3.5 HDD installation, press the open button and then insert the drive into the HDD tray. Close the handle after pushing in the tray.
For 2.5 SSD installation, press the open button and then insert the SSD into the designated slot. Close the handle after inserting the SSD.
For optional audio/microphone combo jack usage, connect it to the designated port.
To release the fan tray, loosen the screws on both sides and pull it out.
For radiator and cooling support, remove the cover and install the desired radiator size. Note that certain sizes may not apply to specific positions.
Remove the cover to install an RGB controller or fan hub.
Refer to the product manual for specific measurements and specifications.

Case components

LIAN-LI-G50.LAN20.00-Lancool-2-Black-Tempered-Glass-ATX-Case-
FIG-1

A Power Bution. Reset Buirophone Combo Jack, 2 X USB 3.0, 1 x USB 3.1 Type C (Optional)
B) , 120 mm fan x 1, Supporting 120 mm fan x 2 or 140 mm fan x 2 or 120 mm radiator x 1, or 240 mm radiator x 1, Removable dust filter
C) 120 mm fan x 1 Supporting 120 mm fan x 2
(E) Removable HDD trav: Supporting 3.5″ HDD x 3 or 2.5″ SSD × 3
(F) Removable fan tray: Supporting 120 mm fan x 3 or 140 mm fan x 2 or 360 mm radiator x 1 or 280 mm radiator x 1 120 mm fan x 1 (Removable dust filter in front panel)
(H) Removable HDD tray: Supporting 2.5″ SSD × 2
I PSU tray: Supporting ATX PSU × 1 (Removable dust filter in bottom)
J Removable HDD tray: Supporting 2.5″ SSD × 2