LIAN LI G50.12RSLIN1.01 Lancool 215 E-ATX RGB Gaming PC Case Installation Guide
- June 1, 2024
- LIAN LI
Table of Contents
LIAN LI G50.12RSLIN1.01 Lancool 215 E-ATX RGB Gaming PC Case
Product Information
Specifications
- Model: G50.12RSLIN1.01
- Package Contents:
- 4 x pcs Reverse Blade
- 1 x Installation Guide
- 1 x Power Module
Product Usage Instructions
Installation Guide
Follow these steps for proper installation:
- Ensure the socket sizes for the power module match.
- Remove the fan interlocking key if obstructed by the radiator inlet/outlet.
- Detach the top cover if affected by the radiator inlet/outlet and route the cable vertically.
- Connect the power module to the PWM fan header.
- Connect to 5V ARGB using the 3-pin header.
FAQ
-
Q: Can the fan interlocking key be reattached after removal?
A: Yes, the fan interlocking key can be reattached if necessary. -
Q: What should I do if the top cover is obstructed by the radiator?
A: Remove the top cover and ensure the cable vertically to avoid obstruction.
Package Contents
Power Cable Installation
The sockets for the power module are in different sizes, please be aware of
the directions.
Remove the Fan Interlocking Key
The fan interlocking key is removable if it is affected by the radiator
inlet and outlet.
Fan-to-Fan Connection
Switch Orientation
Steps to Switch Orientation of the Cable on the Power Module:
The top cover is removable if it is affected by the radiator inlet and outlet and route the cable vertically.
Power Module to Motherboard connection
Do not connect the wrong type of LED connector. If it is connected to the 12V connector, permanent damage will occur.