LIAN LI GA II TRINITY 240 Provider of PC Cases Installation Guide
- May 15, 2024
- LIAN LI
Table of Contents
LIAN LI GA II TRINITY 240 Provider of PC Cases
Specifications:
- Product Name: GA II TRINITY 240 / 360
- Socket Compatibility: Intel LGA1700 / 115X / 1200, AMD Am4
- Fan Support: 240 x 8 pcs, 360 x 12 pcs
Product Usage Instructions
Installation Guide
Follow the steps below to install the GA II TRINITY 240 / 360:
-
Rotate Orientation
Ensure the control film direction aligns with the CPU. Follow the left reference guide for different tube orientation. -
Rotate the Pump
For Intel LGA1700 / 115X / 1200, ensure the tubes face downward. For AMD Am4, rotate the pump accordingly. -
Secure the Latch
Secure the AMD latch onto the platform’s retention clip and tighten with the spring nut. -
Customize Pump Cover
Select between Duo-Infinity or Sink Hole designs for the pump cover. -
Fan Removal
If needed, remove the fan by disconnecting from the PSU SATA 15 pin and 5V ARGB 3 pin header.
FAQ:
-
Q: How should I position the cable convex side on the interface?
A: The cable convex side should face upward for proper installation. -
Q: What should I do for MB sync?
A: Connect to the MB sync using the provided connectors for non-essential synchronization.
GA II TRINITY 240 / 360
INSTALLATION GUIDE
Hardware List
Apply thermal paste
- Default Orientation
- Rotate Orientation
- The control film direction depends on the CPU, please follow left reference to place the control film as different tube orientation
Rotate the pump
- Default Orientation
- Rotate Orientation
In consideration of performance, only offer these 2 tubes outlet orientation
Intel LGA1700 / 115X / 1200
Secure the AMD latch onto the platform’s retention clip and tighten with spring nut
Mount in the chassis
Customize pump cover
Remove the outer cover
Install the inner cover L & K
- Hold on top of the latch for easier positioning with force
- Place the latch in the slot and twist the inner cover to install properly
Install the outer cover & J
Cable connection of the pump
Attention! The cable convex side on the interface shall face upward
Fan removal
Use of fan cable
Cable Connection Guide