Savio AE-01 Power Meter Energy Monitor User Manual

Savio AE-01 Power Meter Energy Monitor User Manual

Thank you for choosing Savio product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.

If there is something that we could improve on our products, please write to us at support@savio.net.pl

Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of purchased device it is recommended to read the whole manual.

1. Package contents:

• SAVIO AE-01 Power meter with LCD screen
• User manual

2. Usage:

SAVIO AE-01 Power meter socket is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.

3. Technical specification:

• Rated voltage: 230 V~, 50 Hz
• Max load: 3680 W
• Max current: 16 A
• Accuracy: +/- 1%
• Display: current time, electrical voltage and current, current energy consumption, energy bill value, total energy and consumption
• Type: single rate
• Battery: 3.6 V Ni-MH
• Socket standard: CEE 7/5 (E)
• Plug standard: CEE 7/7 (E/F)
• Time range: 0 seconds ­ 9999 days
• Power range: 0 ­ 9999 W
• Energy measurement: 0 – 9999 kWh
• Voltage range: 0 ­ 9999 V
• Current range: 0 ­ 9999 A
• Frequency range: 0 ­ 9999 Hz
• Price range: 0 – 99.99 cost / kWh
• Cost range: 0 ­ 9999 cost
• Power factor: 0 – 1.00 PF
• Working temperature: -10°C — 45°C · Size: 72.5 × 76 × 159.5 mm
• Weight: 192 g

4. Configuration:

4.1 Connect the device to the 230 V socket. Power meter will automatically work in MODE 1.
4.2 If an abnormal display appears or there is no response after pressing the buttons, the device must be reset. In order to do that, press RESET (R) button for 3s.
4.3 Connect the appliance you want to measure for energy consumption to the power meter.

5. Electricity price setting:

5.1 Press and hold the COST button for longer than 3 seconds, the bottom display will flash 0.00.
5.2 Press FUNCTION button and the digit on the left hand side will flash.
5.3 Use UP and DOWN button to change the value and press FUNCTION button to move to the next digit.
5.4 Repeat the process for all the digits and press COST button to exit and save the values.
5.5 Plug the device to a power source and connect the appliance.

6. Modes switching

In order to switch between modes, press FUNCTION button.

6.1 MODE 1: Time / Watt / Cost Display

6.1.1 1st line displays how long the device being monitored has been connected to the power source. The display shows up to 00:59 seconds, then switches into minutes (01:00). After 60 minutes, the display shows 01:00 for hours and minutes. After 24 hours it resets to 00.00 (in Mode 2, the 3rd line will show: 1 day).
6.1.2 2nd line displays the current power being used, within 0 – 9999 W range.
6.1.3 3rd line displays the current electricity cost which ranges between 0 – 9999 cost.

6.2 MODE 2: Time / Cumulative Electrical Usage Display

6.2.1 1st line shows total time of the monitored device being connected to the power source (as described in MODE 1).
6.2.2 2nd line presents cumulative energy usage, values range is 0 – 9999 kWh. 6.2.3 3rd line shows days within range 0 – 9999.
6.2.3 3rd line shows days within range 0 – 9999.

6.3 MODE 3: Time / Voltage / Frequency Display

6.3.1 1st line displays how long the device being monitored has been connected to the power source (as described in MODE 1).
6.3.2 2nd line displays the input voltage, the range is 0 – 9999 V.
6.3.3 3rd line displays the input frequency, the range is 0 – 9999 Hz.

6.4 MODE 4: Time / Current / Power Factor Display

6.4.1 1st line displays how long the device being monitored has been connected to the power source (as described in MODE 1).
6.4.2 2nd line displays the drawn current, the range is 0 – 9999 A.
6.4.3 3rd line displays the power factor, the range is 0 – 1.00 PF.

6.5 MODE 5: Time / Lowest Power reading

6.5.1 1st line displays how long the device being monitored has been connected to the power source (as described in MODE 1).
6.5.2 2nd line displays the lowest momentary power reading, the range is 0 – 9999 W.
6.5.3 3rd line displays “Lo” without other figures.

6.6 MODE 6: Time / Highest Power reading

6.6.1 1st line displays how long the device being monitored has been connected to the power source(as described in MODE 1).
6.6.2 2nd line shows the highest momentary power reading, the range is
0 – 9999 W.
6.6.3 3rd line shows “HI” without other figures.

6.7 MODE 7: Time / Price Display

6.7.1 1st line displays how long the device being monitored has been connected to the power source (as described in MODE 1).
6.7.2 3rd line shows the cost which ranges between 0 – 99.99 COST / kWh

7. Additional information’s:

• To reset the device, press the RESET (R) button and hold it for 3 s.
• If the maximum load exceeds 3680 W, the screen will show “OVERLOAD”.
• The device is equipped with batteries so that it can be programmed without being plugged in. If the battery is discharged, connect the AE-01 to the power supply to recharge it.

8. Safety conditions:

• Use the product in accordance with its intended use, as improper use may damage the product.
• Do not expose the device to moisture, heat or sunlight, do not use the product in a dusty environment.
• The device should be cleaned only with a dry cloth.
• Independent repairs and modification result automatic loss of the warranty.
• Hitting or dropping may damage the product.
• Ensure that the device connected to the wattmeter does not exceed max 3680 W load.

Warranty:
The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. Warranty card is available for download on our website: www.savio.net.pl/en/service

Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.

Information of the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protecion by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.

PRODUCER:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszow
www.savio.net.pl

References

• Strona główna - Savio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>