AIGOSTAR 284-ES LED String Light User Manual
- June 13, 2024
- aigostar
Table of Contents
ITALIA MARKET SRL
VIA DELLE INDUSTRIE, 9/1
20883 MEZZAGO(MB), ITALIA
P.IVA: IT10502730962
HTTP://WWW.AIGOSTAR.COM
MADE IN CHINA
LED STRING LIGHT
I. PRODUCT DESCRIPTION
- Press the button to switch between 8 dynamic functions.
- Press and hold the button for 3 seconds until the green light comes on, indicating a timed state ( Light on for 6 hours and off for 18 hours, repeating automatically every day.). Press and hold the button for 3 seconds until the green light goes out, indicating that the timer has been canceled.
- Automatic access to the last set function after power failure and re-powering.
Introduction to function change:
- Combination. Automatic continuous change of various functions.
- In Waves. Automatically change backwards and forwards (two speed changes).
- Sequential. Auto change (four speed changes).
- SLO-GLO. A single light fade (three speed changes).
- Chasing/Flash. Automatic change of the star flashing.
- Slow Fade. Two lights fade at the same time (three speed changes).
- Twinkle/Flash. Automatic twinkle.
- Steady On. The LED is always on.
II. INSTALLATION:
Schematic diagram
Button
Connect the end connector of the light string to the power controller connector and tighten the knob.
- Button
- Access points for products
III. WARNINGS
- Do not connect the chain to the supply while it is in the packaging.
- Use only the transformer for the product, and do not connect the string light to the circuit of other string lights.
- Please hang them out of the reach of children to prevent choking accidents.
- Please discard at the end of the service life in accordance with the municipal waste.
- The lamps are not replaceable.
- Warning-risk of electric shock if lamps are broken or missing.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>