ENFORCER NS-104UT-MAQ Unmanaged PoE Switches Instruction Manual

: June 13, 2024
: ENFORCER

Table of Contents

Parts List
Specifications
Sample Installation
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ENFORCER NS-104UT-MAQ Unmanaged PoE Switches Instruction Manual

Model	Ethernet	Ports	Bandwidth	VLAN	Power
NS-104UT-MAQ	10/100BASE-T	4 Downlink, 2 uplink	1.2Gbps	Yes	60W

ENFORCER Unmanaged PoE Switches provide Ethernet and power to PoE devices such as IP cameras, IP access control, IP speakers/intercoms, IP telephony, etc. Fast packet forwarding cap abilityand extra backplane bandwidth ensure clear images at fast transmission speeds for video, making them well-suited for HD IP CCTV installations.

Provides both Ethernet data and power to multiple PoE devices including IP cameras, IP access, IP speakers/intercoms, VOIP, etc.
Specially designed for video transmission with fast packet forwarding capability for clear images and smooth transmission
Easy plug-and-play installation
Supports up to 10/100/1000BASE-T*
IEEE 802.3x flow control

Parts List

1x PoE Switch
1x Power adapter*
1x AC Power cord 1x Manual

Specifications

Model| NS-104UT-MAQ| NS-504UT-GAQ| NS-508UT-GAQ| NS- 516UT-GAQ| NS-524UT-GAQ
---|---|---|---|---|---
Operating voltage| 48~57 VDC†| 100~240 VAC
Power consumption| <5W| <5W| <10W| <15W| <20W
Ports| 4 Downlink,2 uplink| 4 Downlink,1 uplink, 1 SFP| 8 Downlink,2 uplink| 16 Downlink,2 uplink, 2 SFP| 24 Downlink,2 uplink, 2 SFP
Ethernet speed| 10/100Mbps (uplink,100Mbps)| 10/100/1000Mbps (uplink, 1000Mbps)
**Ethernet standard| ** IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x| IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x, IEEE 802.3z| IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z| ** IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Transmission distance| 328ft (100m)‡§
PoE capacity| 55W| 60W| 120W| 250W| 370W
Switching capacity| 1.2Gbps| 12Gbps| 20Gbps| 40Gbps| 56Gbps
****Transfer rate| 10Mbps| 14,880pps
100Mbps| 148,800pps
1000Mbps| N/A| 1,488,000pps
MAC Address table| 1K| 2K| 4K| 8K
LED Indicators| Connection/transmission and PoE for each port, power
Operating humidity| 0~85% non-condensing| 0~90% non-condensing
Operating temperature| 14°~122° F (-10°~40° C)
Dimensions| 4″x7/8″x215/16″(102x22x75 mm)| 65/8″x11/4″x311/16″(168x32x94 mm)| 77/8″x23/4″x45/8″ (200x44x118 mm)| 125/8″x13/4″x81/8″ (320x44x207mm)
Weight**| 6.8-oz (194g)| 1-lb 5-oz (480g)| 1-lb 12.4-oz (806g)| 4-lb 8-oz (2.06kg)

†Power adapter included ‡ Distance depends on Ethernet cables used. Cat5e/6 recommended §656ft (200m) at 10Mbps on NS-104UT-MAQ, NS-516UT-GAQ, and NS- 524UT-GAQ with VLAN switch ON

Sample Installation

Determine the best location for the switch.
NOTE: The uplink cable (as well as the PoE device cable, except for the NS-104UT-MAQ, NS-516UT-GAQ, and NS-524UT-GAQ with the VLAN function switch turned ON) cannot exceed 328ft (100m).
If installing the NS-104UT-MAQ, NS-516UT-GAQ, or the NS-524UT-GAQ, make sure that the VLAN function switch is set correctly.
Turn off power to both the display device and the PoE device before proceeding. Installation under power will damage the transmission equipment.
Connect the PoE device(s) to a downlink port on the switch using a Cat5e/6 cable conforming to either the EIA/TIA 568A or 568B standard.
Connect the NVR or computer to the uplink port on the switch using a Cat5e/6 cable conforming to either the EIA/TIA568A or 568B standard.
Connect the power to the switch and ensure that the power LED and the PoE LED on any connected port is on.
Turn on the display device and ensure that the system is functioning properly.

Troubleshooting

PoE Device doesn’t function correctly

Confirm that both input and output devices are turned on
Ensure that the Ethernet cable does not exceed 328ft (100m) or 656ft (200m) for the NS-104UT-MAQ, NS-516UT-GAQ, and NS-524UT-GAQ with VLAN function switch turned ON
Confirm that no PoE equipment power requirement exceeds 30W
Confirm that the Ethernet cable meets EIA/TIA 568A or 568B standard and that both ends are the same standard (not a crossover cable)
Test the Ethernet cable to ensure that it is operational
Test with another PoE device that is known to be operating correctly

FCC COMPLIANCE STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.

IMPORTANT: Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws and statutes related to
monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or statutes.

IMPORTANT: Users and installers of this product are responsible for ensuring that the installation and configuration of this product complies with all national, state,
and local laws and codes. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or codes.
California Proposition 65 Warning: These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.

WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1) year from the date of sale
to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to

SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper
or abnormal usage, or faulty installation, or if for any other reason SECO- LARM determines that such equipment is not operating properly as a result of causes other
than defects in material and workmanship. The sole obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damage of any kind to the purchaser or anyone else.

NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2023 SECO-LARM U.S.A., Inc. All rights reserved.

SECO-LARM ® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: 949-261-2999 | 800-662-0800
Email: sales@seco-larm.com

ENFORCER Logo