HOWDENS LAM6380 Integrated Fridge Freezer Instruction Manual
- June 13, 2024
- Howdens
Table of Contents
HOWDENS LAM6380 Integrated Fridge Freezer
Product Information
- Product Name: Extra Tall Integrated Fridge Freezer
- Model Number: LAM6380
- Manufacturer: Howdens
- Installation Instructions Version : v1.5 031023
Installation Overview
- Establish power socket location (must be accessible after installation)
- Prepare cabinet (remove back panels)
- Fix spacer brackets to fridge freezer
Safety Information
- The fridge freezer must be fixed securely and level.
- Do not install a damaged appliance.
- This appliance must be earthed.
- Risk of injury: Beware of metal edges. Use gloves when handling.
- Do not use extension cables/adapters.
Installation Parts Required
- Upper bracket screws
- Feet screws
- Upper bracket and fixings
- Middle bracket and fixings
- Door slider and fixings
- Covers
- Screw hole plug
Generic instructions, (to be used in conjunction with User Instructions).
- Please read these installation instructions to ensure safe fitting and use of the appliance.
- The appliance should be fitted by a suitably competent and qualified person.
- Please keep these instructions in a safe place for future reference.
- The danger of suffocation keeps packaging material away from children.
Installation Instructions
Please use brackets with tabs to ensure fridge freezer install depth is 40.5mm. (Use front feet adjustment to assist)
- If installed deeper than 40.5mm (at either side) the fridge freezer doors may not close fully causing issues such as:-
- THE LIGHT WILL STAY ON
- THE ALARM WILL SOUND (*Frost-free models)
- THE FRIDGE FREEZER WILL NOT WORK CORRECTLY (Not cooling, icing-up, water leaking, etc.)
Safety Information
Throughout this manual the following symbols are used.
Warning for electric shock.
- Warning for risk of fire / flammable materials.|
- Warning for injury or property damage risk.
Installation
Tools required
NOTE: Screw heads are Phillips size 2.
Cabinet pre-build and airflow
IMPORTANT: Airflow around the fridge freezer is essential. Ventilation
channels must be free of obstruction.
Fit side seal trim
- Measure and cut side seals to fit between bracket zones.
- Apply seal, removing backing tape as you progress. Start from the bottom edge.
- Remove screw hole covers.
- Loosely attach three spacer brackets.
Inserting into cabinet
- Open doors, and adjust feet so the appliance stands vertically true and the top trim aligns against the shelf.
- Ensure the fridge freezer is 40.5mm back from the front edge of the cabinet.
Securing the fridge freezer (vertically true and level in cabinet).
WARNING: The appliance should be set back 40.5mm from the front edge of the cabinet.
Attach door sliders
- Punch or pilot drill the pre-marked holes on the appliance doors.
Fit covers
Plinth vent
Fit a plinth vent for necessary airflow around the fridge freezer, see
Kitchen Installation Manual for fitting instructions.
A. Reversing door opening
WARNING: If required, do this before installing into the cabinet.
Product information was correct at the time of publication in October 2023.
The company has a policy of continuous product development and reserves the
right to change any products and specifications given in this manual. Subject
to the Terms and Conditions of Trading, a copy of the Howdens Terms and
Conditions is available upon request. Copyright © 2023 Howden Joinery Ltd. All
rights reserved.
Howden Joinery Ltd.
Thorpe Road, Howden, East Yorkshire. DN14 7PA England Howdens Cuisines SAS.
Z.A. du Bois Rigault Nord, 1 Rue Calmette, 62880 Vendin-le-Vieil, Cedex,
France
Points de collecte sur
www.quefairedemesdechets.fr
Privilégiez la réparation ou le don de votre apparei
References
- Howdens | The UK's Number 1 Trade Kitchen Supplier
- Register an Appliance | Aftersales | Howdens
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>