Howdens WTCLE93 Backboard Sealer Strip Installation Guide
- September 27, 2024
- Howdens
Table of Contents
Howdens WTCLE93 Backboard Sealer Strip
Backboard Sealer Strip Installation
Notes: Ensure packaging is disposed of in a safe environmentally friendly
way
The decor strip is not designed for use as a moisture sealant, it should be
bonded in position prior to installation of the backboard
Installation must be carried out by a competent person
Assembly
-
Measure and cut the strip to the required length using a tooth saw.
Note: 45° cuts will be required if sealer strip is to be installed around right angled corners.
-
Secure the strip to the appropriate edges of the backboard using waterproof contact adhesive, following the manufacturers instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>