milwaukee 2786-20 M18 Fuel 18V Lithium-Ion Brushless Cordless 9 Inch Cut Off Saw Instructions
- June 12, 2024
- Milwaukee
Table of Contents
milwaukee 2786-20 M18 Fuel 18V Lithium-Ion Brushless Cordless 9 Inch Cut
Off Saw
Product Information
- Product Name: M18 FUELTM 9 Cut-Off SAW w/ One-KeyTM
- Catalog Number: 2786-20
- Starting Serial Number: K96A
- Warranty: Disassembly is not recommended and could void the warranty.
Product Usage Instructions
- Before using the saw, read the user manual carefully.
- Ensure that the saw is properly assembled and all parts are in good condition.
- Connect the saw to a power source and turn it on.
- Use the blade flange to attach the cutting blade to the saw.
- Adjust the guard stop plate to the desired cutting depth.
- Wear appropriate safety gear, including eye protection, gloves, and ear protection.
- Hold the saw firmly with both hands and make sure the blade is perpendicular to the cutting material.
- Press the trigger to start cutting.
- After use, disconnect the saw from the power source and store it in a safe place.
If you experience any issues or have questions about the product, please
contact Milwaukee Product Service at: Product Technical Support via phone at:
262.783.8642 or Via email at:
METProductSupport@milwaukeetool.com.
For service-related questions and issues related to One-KeyTM electronics,
contact e-Service at:
www.milwaukeetool.com/e-service or
call 1.800.SAWDUST (1.800.729.3878). Disassembly is not recommended and could
void the warranty. Return it to a MILWAUKEE factory Service Center location,
freight prepaid and insured. A copy of the proof of purchase should be
included with the return product.
Due to the complexities of One-Key™ electronics contact the following for
service related questions and issues:
e-Service at:
www.milwaukeetool.com/e-service
or
questions, please call 1.800.SAWDUST (1.800.729.3878)
or
Return it to a MILWAUKEE factory Service Center location, freight prepaid and
insured.
A copy of the proof of purchase should be included with the return product.
If you have questions please contact Milwaukee Product Service at:
Product Technical Support via phone at: 262.783.8642
or
Via email at:
METProductSupport@milwaukeetool.com
Disassembly is not recommended and could void the warranty
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
SERVICE PARTS LIST
WIRING SPECIFICATIONS
SCREW TORQUE SPECIFICATIONS
