HALLIBURTON Spy Glass Pump Sizing Software User Guide
- June 13, 2024
- HALLIBURTON
Table of Contents
HALLIBURTON Spy Glass Pump Sizing Software User Guide
Begin at the “My Sizings” page after opening SpyGlassTM. This will list all the sizings, scenarios, and performance evaluations that the user has generated in reverse chronological order.
Select one of the sizings to continue working on or begin a new sizing by
left-clicking the “Create Sizing” button above the table on the right-hand
side of the window.
Create a New Sizing
-
Log into Spy Glass TM
-
Left-click the “Create Sizing” button
-
Enter the associated data for your sizing:
a. Enter a Sizing Name
b. Select the Well
c. Select the Appropriate Unit System
d. Select Save in the Top Right
-
The tabs on the top left will be enabled once saved. Select the “Well” tab and enter the appropriate input data. The tab key can be used to navigate from one box to the next.
Two types of data entry exist in SpyGlass:
a. A searchable table nested within the box that is clicked on
b. A box for numerical entry
-
Once the Well page is completed, select the “Parameters” tab on the top left of the screen.
-
The “Parameters” tab is where you will select the equipment for your design. Four additional functionalities may assist you in designing your ESP.
a. First, you can enable the charts by selecting the graph icon next to the scenario dropdown. The pump table and a dropdown menu for other necessary charts will appear.
b . Second is the calculator icon which sits next to the charts. This will open the side calculator on the right-hand side of your screen. Each component has a calculator icon which is a quick navigation to the calculations specific to that component.
c. The third function is a toggle on the top right of each piece of equipment. When this is toggled on, a graph related to the performance of that piece of equipment will appear.
d. Lastly, the fourth function is the built-in alerts for each piece of equipment. If there is a caution (orange) or warning (red) relating to the equipment specs, the box surrounding the equipment will appear as the warning color, and the bell at the top left will show the number of total alerts. When the bell is clicked, it will open a window showing the specific alerts.
-
Once your sizing is completed, saving all the changes you have made is best. A customizable PDF of the sizing can be created by clicking the three-button menu and selecting the “Generate Report” option in the top right of the screen.
a. On the reporting page, you can select reports only pertinent to the end user. There is an option to select all reports quickly. This is done by selecting the green “Add All Scenarios” button on the top left of the reports page.
b. A report preview will be displayed on the right-hand side of the screen. When ready to print to PDF, click the blue “Print Report” button.
c. You can save the report to your computer for later use.
Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. H014446 03/23 © 2023 Halliburton. All Rights Reserved.
For more information, contact your Halliburton
representative or visit us at halliburton.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>