VEVOR 110V Portable Band Saw User Manual
- June 13, 2024
- VEVOR
Table of Contents
VEVOR 110V Portable Band Saw
Product Information: Sanders
A sander is a power tool used for smoothing surfaces by abrasion with
sandpaper. It is commonly used in woodworking and metalworking applications to
remove material or create a smooth finish.
This user manual provides operating and safety instructions for sanders. It
includes information on the safety equipment required, training, and
responsibilities of both the user and authorized trainer.
Safety Equipment Required
- Goggles
- Dust Mask
- Ear Protection
Product Usage Instructions
- Ensure you have received proper training on how to use the sander and understand all safety requirements.
- Wear the required personal protective equipment (PPE) before using the machine. This includes goggles, a dust mask, and ear protection.
- If you do not have the necessary training or PPE, do not operate the machinery. Inform your supervisor or manager immediately.
- Before starting the sander, inspect it for any visible damage or defects. Do not use if there are any issues.
- Position the workpiece securely on a stable surface. Ensure it is properly clamped or held in place.
- Hold the sander with both hands and firmly grip the handles for stability.
- Switch on the sander and allow it to reach full speed before making contact with the workpiece.
- Move the sander in a smooth and controlled motion across the workpiece. Avoid applying excessive pressure.
- Keep your hands and fingers away from the sanding area to prevent injuries.
- Regularly check the sandpaper for wear and replace it when necessary.
- After use, switch off the sander and unplug it from the power source.
- Clean the sander and surrounding area, removing any dust or debris.
Remember, always prioritize your safety and follow the instructions provided in this manual. If you have any concerns or require further training, inform your supervisor or manager.
Safe System of Work
OPERATING AND SAFETY INSTRUCTION FOR SANDERS
- Name : …………………………………………….…………. T raining Dat e:…..…………………………
| Instruction| Understood
P or X
---|---|---
1| Explained what safety equipment is required to use this machine. Goggles,
Dust Mask and Ear Protection|
2| Explained why safety equipment is to be used on this machine.|
3| Explained why loose clothing or ties are not be worn.|
4| Shown where and how to use main machine isolator.|
5| Shown where and how to use on / off switch.|
6| Shown how the cutting belt rotates.|
7| Shown where not to put Hands / Fingers etc.|
8| Shown how to change belts and when required.|
9| Shown how to use the Dust Extraction Machine|
10| Shown how the vice works if vice is fitted|
11| Shown how to clamp work in vice without crushing it.|
12| Shown how to remove work from the Vice|
13| Shown how the coolant turns on /off and is adjusted.|
14| I have read the Safety Precautions on using Sanders.|
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.
- Name : ………………………………………………………………………………………………………….
- Signed : ……………………………………………………………….. Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they require further training. I authorise this person to use the machinery detailed above.
- Name : …………………………………………………………………….……………(Authorised Trainer)
- Signed …………………………………………………………………… Date: ……………………………