GPO SW-196F Ambassador Portable Streaming Turn Table User Guide

GPO SW-196F Ambassador Portable Streaming Turn Table

Product Information

The GPO Ambassador Portable Streaming Turntable is a retro-themed unit that adds a touch of classic style to any room while providing excellent audio quality through its built-in speakers. It features a 3-speed turntable (33, 45, or 78 RPM) with a belt drive and semi-automatic play tone arm. The turntable comes with a ceramic stereo cartridge and jewel stylus, as well as a built-in 45 RPM adapter. It also has aux-in and aux-out functions, built-in stereo speakers, rechargeable battery, and Bluetooth functionality.

The turntable package includes the following items:

• 1x SW-196F Ambassador
• 1x Turntable Needle (fitted)
• 1x Turntable Slip Mat (placed on the turntable)
• 1x Blank USB Stick
• 1x DC Power Cable
• 1x Aux-in Cable
• 1x Manual

Product Usage Instructions

1. Unpacking:
   • Carefully remove all the contents from the packaging.
   • Retain and store the manual for future reference.
   • Choose a location for the unit that is away from inclines, direct sunlight, heat, and moisture.
2. Keep all ventilation holes clear and avoid placing any equipment on top of the unit to prevent damage.
3. Only remove the stylus guard from the stylus assembly during use. Leaving the guard in place during storage will protect the stylus from damage.
4. Mode Selection:
   • Turntable Mode: Play a vinyl record through the unit’s built-in speakers.
   • USB Mode: Play MP3 files stored on an external USB drive.
   • USB Record Mode: Record your vinyl to MP3 files on an external USB drive.
   • Aux-in Mode: Play music from your music player, smartphone, or other device through the unit’s built-in speakers.
   • Bluetooth Mode: Connect the unit to external Bluetooth-enabled speakers.
5. Location of Controls:
   • Refer to the diagram for the location of controls on the unit.
6. Battery Level Indicator
   • The battery power indicator light will show the remaining battery level.

Introduction

Thanks for purchasing the Ambassador turntable player from GPO. This retro- themed unit adds a touch of classic style to any room, while still providing amazing audio quality through the built in speakers. To get the most from your new turntable player, please read these instructions carefully before use, and keep them in a safe place for future reference.

Unpacking

This package contains:

• 1x SW-196F Ambassador
• 1x Turntable Needle (fitted)
• 1x Turntable Slip Mat (placed on the turntable)
• 1x Blank USB Stick
• 1x DC Power Cable
• 1x Aux-in Cable
• 1x Manual

Carefully remove all of the contents from the packaging. Make sure you retain and store this manual for future reference. When choosing a location for the unit, avoid inclines, direct sunlight or sources of heat and moisture.

Keep all of the ventilation holes clear, and do not place any equipment on top of the unit as this can lead to damage. Only remove the stylus guard from the stylus assembly during use. Leaving the guard in place during storage will protect your stylus from damage.

Features

Your Ambassador turntable unit has the following features:

1. 3-speed turntable (33, 45 or 78 RPM)
2. Belt drive and semi-automatic play tone arm
3. Ceramic stereo cartridge and jewel stylus
4. Built-in 45 RPM adapter
5. Aux-in and Aux-out functions
6. Built-in stereo speakers
7. Rechargeable battery
8. Bluetooth functionality

1. Turntable Indicator Light
2. Aux-in Indicator Light
3. USB Indicator Light
4. Bluetooth Indicator Light
5. Battery Power Indicator Light
6. Recording Indicator Light
7. Power On/Off and Volume
8. Mode Select
9. Stop
10. Record
11. Fast Forward
12. Rewind
13. Play/Pause
14. Aux-in Jack
15. Aux-out Jack
16. DC Power Jack

Mode Selection

Turntable Mode
play a vinyl record through the unit’s built-in speakers

USB Mode
play MP3 files stored on an external USB drive

USB Record Mode
record your vinyl to MP3 files on an external USE drive

Aux-in Mode
play music from your music player, smartphone or other device through the unit’s built in speakers

Bluetooth Mode
connect the unit to external Bluetooth-enabled speakers

Battery Level Indicator
Displays the current charge status of the rechargeable battery

• To select the Turntable, USB, Aux-in or Bluetooth mode, press the mode select button until the relevant indicator light is illuminated.
• Press to STOP music playing in USB mode.Press to STOP vinyl recording in Record mode.
• PLAY or PAUSE the music under USB mode.
• Press to record your vinyl records, more information in record section.
• Press to the NEXT song under USB mode.
• Press to the PREVIOUS song under USB mode.

Unit Operation
Your Ambassador turntable player has a number of modes of operation. Each one will allow you to play music from a different source using the unit’s two in-built full range stereo speakers

Turntable Mode

1. Connect the small DC jack into the DC-IN port on the rear of the unit.
2. Connect the plug to a mains outlet and turn the power socket on.
3. Turn on the unit using the Power/Volume Control.
4. Use the mode select button until the LED indicator shows that you have selected turntable mode:
5. Place your chosen vinyl record onto the turntable.
6. Set the correct speed (RPM) of your record using the RPM Speed Control.
7. Move the tone arm to the desired starting point on the record. The turntable will now start to play.
8. Auto-stop on, the turntable will start spinning when the arm is moved towards the record, when the last track is finished the turntable will stop spinning.
9. Adjust the volume to your preferred volume.
10. Auto-stop off, the turntable will start spinning as soon the record play function is selected, when the last track is finished the turntable will continue to spin until the unit isswitched off or until a different mode is selected, this function is only required for certain 45 pm records that are pressed more towards the centre of the record.

AUX-IN Play Mode

1. Turn on the unit power
2. Select Aux-in mode using the mode select button
3. Connect your chosen device to the unit’s aux-in jack using the cable provided
4. Press the play/pause button to begin playback
5. Use the volume controls to set the desired sound levels

USB Play Mode

1. Turn on the unit power
2. Select USB mode using the mode select button
3. Connect your USB device to the unit using the USB slot
4. Press the play/pause button to begin playback
5. Use the volume controls to set the desired sound levels
6. To record from vinyl to your device, select USB record mode
7. Press record to begin recording
8. Press stop to cancel recording

Bluetooth Mode

The Ambassador’s Bluetooth mode allows you to stream your vinyl
to any Bluetooth enabled speaker or headphones.

1. Turn on the unit power
2. Select Bluetooth mode by holding the mode button down for three seconds while in turntable, USB or Aux-in mode
3. The Bluetooth indicator light will flash rapidly as the unit searches for nearby Bluetooth-enabled devices.
4. When paired the blue light will flash shortly with a three second interval
5. If the devices fail to sync, please repeat points 1-4.
6. Use the volume controls to set the desired sound levels
7. Hold down the stop button for three seconds to turn off Bluetooth mode and move straight to turntable mode

Please note: When pairing the Ambassador to your Bluetooth speaker or headphones, please ensure that the device you wish to stream vinyl to is set to pairing mode. This will allow them to sync.

Vinyl Record Mode

1. Press the mode button until the red LED light next to Turntbale is illuminated.
2. Insert a blank USB stick into the slot
3. Place the desired vinyl onto the turntabled and begin playing.
4. Press the record button on the control panel, the red light next to record will begin to flash. Press the record button once to record the vinyl in one track, press the record button twice to split the tracks.

Charging the Battery

The battery level indicator displays the current charge status of the unit’s rechargeable battery.
While operating on mains power via the DC cable and jack, the unit will automatically begin to charge the inbuilt battery. The battery indicator light will indicate how the charging is progressing:

• Red: The unit needs to be charged
• Green: The unit is charging
• Blue: The unit has fully charged

Line Out
To use your Ambassador turntable with external speakers, connect your speakers to the unit’s Aux-out jack.

Headphones Out
Headphones can be connected using the Aux-out jack.

RCA Audio Out

An RCA cable is included with you GPO Ambassador, you will require this cable to connect to extra speakers.

Replace Stylus

The unit’s stylus will need replacing regularly.

To replace the stylus:

1. Push the arm lock to release the tone arm
2. Remove the cap from the cartridge to expose the needle
3. Carefully remove the cartridge from the socket
4. Completely remove the stylus needle from the cartridge
5. Carefully place a new stylus needle into the cartridge
6. Place the cartridge back into the socket
7. Put the cartridge cap back in place
8. Re-engage the arm lock

The turntable’s stylus needs to be replaced every 3-4 months for best performance. To buy a replacement stylus, go to www.gporetro.com or visit one of our stockists.

Tips for Better Performance

To get the best possible performance from your turntable, please ensure that you:

• Always handle the unit carefully, and take care to lift it from the centre or both edges.
• Do not touch the stylus tip with your finger, and avoid bumping it onto the turntable mat or the edge of a record.
• Regularly clean the stylus tip using a soft brush in a back-to-front motion.
• Never use harsh chemicals or solvents on any part of the turntable system.
• Ensure that the unit is unplugged and the tone arm is secured before moving.

Product Care

Your SW-196F Ambassador record player will provide you with years of listening pleasure, as long as it is properly cared for. To ensure that the unit remains in working condition, please takecare to:

• Keep the unit clean, dry, and away from any potential sources of splashing or dripping, such as vases.
• Avoid areas with high levels of humidity – such as kitchens and bathrooms, and those with extreme temperatures of 35°C or higher.
• Do not let any loose items fall into the unit. If this happens, unplug the unit and call our support team for advice. Always unplug the unit before cleaning.
• Take care when cleaning and wiping the unit’s plastic parts and finish, and use only a dry dust cloth. The front panel can be cleaned gently with a damp cloth and mild soap.
• Store the unit horizontally. If placed on an incline, the unit’s playback may be affected.
• Avoid condensation. If the unit is moved from a cold to a warmer location, please wait 30 minutes before operation.
• Disconnect the power supply after use.

Product Support

For more advice or assistance, please visit www.gporetro.com, or call our support team on 0845 521 4095.
Please note, for your personal safety you SHOULD NOT attempt to open the unit’s casing. Opening the casing voids your warranty, and no user serviceable parts are contained inside.

Hereby ProtelX, declares that this equipment (GPO Ambassador) is in compliance with the essential requirements and other relevant provisions of Directive, you can access a copy of this certificate on
www.gporetro.com/Certificate-of-Conformity

www.gporetro.com
IMPORTED AND DISTRIBUTED BY:
ProTelX Ltd, Unit 6, Park 17 Industrial Estate, Moss Lane,
Whitefield, Manchester, M45 8FJ UK

References

• GPO Retro - Official Manufacturer of Stylish Retro Products.
• GPO Retro - Official Manufacturer of Stylish Retro Products.
• gpretro.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>