RUGGED RIDGE 13402.XX High Back Front Seat Instruction Manual
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 13402.XX High Back Front Seat
Included components
(1) seat
(1) Plastic cover (LH)
(1) Plastic cover (RH)
(1) Recliner knob
Step (1) Firmly press plastic cover to the side of the metal seat
recliner bracket for each side.
Step (2) Place recliner knob over recliner shaft and press firmly. Repeat
for other side.
Step (3) Recheck to make sure covers and knobs are securely attached
before installing seats
Seat installation instructions
Step (4) Remove old seat from riser by removing 4 bolts. Save these bolts
as they will be reused later.
Step (5) Remove sliders from old seats by removing 4 bolts. Save these
bolts as they will be reused later.
NOTE: To access the rear 2 bolts push slider arm down and move slider
forward.
Step (6) Place sliders onto new seats. Reuse spacers from the old seat to
align the slider.
Step (7) Fasten slider to the new seat using the 4 bolts saved from step 5
Step (8) Carefully place slider back onto seat riser and fasten with 4 bolts saved from step 4
Note: All seats being installed in 1997 – 2002 Jeep ® TJ Wranglers will require a seat adaptor bracket
Documents / Resources
|
RUGGED RIDGE 13402.XX High Back Front
Seat
[pdf] Instruction Manual
13402.XX High Back Front Seat, 13402.XX, High Back Front Seat, Back Front
Seat, Front Seat, Seat
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>