XTM 616753 Awning Hub Instruction Manual
- June 13, 2024
- XTM
Table of Contents
XTM 616753 Awning Hub
Product Information
- Product Name: Awning Hub XTM
- Parts Included: Tent, Awning Pole, Steel Pegs, Carry Bag, Guy Ropes, Straps
- Product Code: CL-AHUB
- Manufacturer : SRG PTY LTD
- Manufactured: China
- ABN : 23 113 230 050
Product Usage Instructions
- Step 1: Ensure the ground is free from sharp objects. Unfasten the tent and spread it out on the ground. Then peg down the floor.
- Step 2: Slide the roof pole out from both sides until you hear a clicking sound.
- Step 3: Stretch all four leg poles until you hear a click sound. The poles are now fully extended.
- Step 4: Fasten all floor adjustable webbings and peg down.
- Step 5 : Fix the roof fly by using guy ropes and peg out away from the tent.
- Step 6: To assemble the awning, use the steel poles and guy ropes provided. Peg down the guy ropes to secure the poles.
Additional Instructions for Fitting to an XTM Awning:
- Step 1: The awning with a channel slot can be attached to the awning hub. There is a keder connector above the front door.
- Step 2: First, take the keder connector off the awning hub and insert the keder into the channel slot.
- Step 3: Then zip the zipper of the keder connector and awning hub. Attach all the adjustable webbing straps to the awning poles.
Please refer to the provided PLU and contact SRG PTY LTD for any further inquiries or support.
PARTS LIST
PARTS LIST
DESCRIPTION
| ****
Tent| 1
Awning Poles| 2
Steel Pegs| 20
Carry Bag| 1
Guy Ropes| 2
Straps| 2
REQUIRED:
SET UP INSTRUCTIONS
-
Step 1
Ensure the ground is free from sharp objects, unfasten the tent, and spread it out on the ground. Then peg down the floor. -
Step 2
Slide the roof pole out from both sides until you hear a “click” sound. -
Step 3
Stretch all four leg poles until you hear a “click” sound. The poles are now fully extended. -
Step 4
Fasten all floor adjustable webbings and peg down. -
Step 5
Fix the roof fly by using guy ropes and peg out away from the tent. -
Step 6
To assemble the awning use the steel poles and guy ropes provided. Peg down the guy ropes to secure the poles.
ADDITIONAL INSTRUCTIONS
FOR FITTING TO AN XTM AWNING
-
Step 1
The awning with a channel slot (as pictured) can be attached to the awning hub. There is a keder connector above the front door. -
Step 2
First, take the keder connector off the awning hub, and insert the keder into the channel slot. -
Step 3
Then zip the zipper of the keder connector and awning hub, and attach all the adjustable webbing straps to the awning poles.
PLU : 616753
CODE : CL-AHUB
Manufactured and Packaged for SRG PTY LTD ABN 23 113 230 050 6 Coulthards Avenue Strathpine QLD 4500 Australia
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>