audio technica AT6900BR Hybrid Insulator User Manual
- June 4, 2024
- Audio-Technica
Table of Contents
audio technica AT6900BR Hybrid Insulator
Thank you for purchasing this Audio-Technica product. Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future reference.
Safety precautions
Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
- Do not leave the product on the floor. Doing so could result in an injury or accident.
- Keep the product out of the reach of small children to avoid injuries or accidents.
- Do not place the product on an unstable location. Doing so could cause associated devices to fall and be damaged or cause injury.
- Do not store the product in direct sunlight, near heating devices, or in hot, humid, or dusty places. Doing so could cause deformation or defects.
- Do not disassemble or modify the product. Doing so could cause damage or deformation.
- Do not subject the product to a strong impact. Doing so could cause damage or deformation.
Notes on use
- Do not use audio devices that are equipped with
- a turntable or a storage medium. Records could be scratched or the music data could be lost due to even a slight tilt at installation.
- Do not use outdoors.
- When the product is used for a long time, it may become discolored due to ultraviolet light (especially direct sunlight) and wear.
- Placing the product on soft material may leave impressions in the material, due to the weight. Use the product on a surface that is stable and as hard as possible.
- Using the product for a long period in a fixed location could leave an impression from the rubber on the surface of the speaker or installation surface.
- After installing the product, do not move or drag it together with the speaker. This could cause the vibration-damping rubber to peel off.Do not use the product for speakers, such as tallboy-type speakers, which may become unstable when used with the product. Be sure to read the user manual for the speaker before use.
- Place the product on a flat, level, and stable surface, and avoid placing it on carpets.
Care
- Use a dry cloth to clean the product.
- Do not use alcohol, paint thinners or other solvents for cleaning purposes.
- For long-term storage, keep the product in a well-ventilated place without high temperatures and humidity.
Name of each part A
Confirm each part before using the product.
- Top
- Bottom
- Vibration-damping rubber (Hannity)
Using the product
- Place the product on a flat, level, and stable surface.
- We do not recommend using the top and bottom in reversed positions.
- Place a speaker on top of the product and then adjust the insulators so the load is evenly distributed and there is no wobble.
- The diagram is an example installation. In addition to the example, change the installation according to the device you are using, such as placing two at the front and one at the back of a speaker.
- Install the insulators so the load is balanced, and not centered on a single insulator.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>