Plastica SSW TP 09 Chop Saw Air Operated Nail Guns and Staplers Instructions

Plastica SSW TP 09 Chop Saw Air Operated Nail Guns and Staplers

Product Information

The product is an air-operated nail gun and stapler. It is designed for use in various tasks that require fixing materials such as nails and staples into timber. The nail gun operates in a single-fire (semi-automatic) mode and should not be used in bump or automatic modes. It is important to follow the provided operating and safety instructions to ensure safe and effective use of the product.

Product Usage Instructions

1. When firing a nail into timber, take particular care in placing your hands to avoid any potential injury.
2. Always be aware of your surroundings and ensure there are no hazards or people in close proximity when using the nail gun.
3. Under no circumstances should you engage in horseplay or act in a dangerous manner while using the nailer/stapler. Such behavior may result in gross misconduct and further action from the police.
4. Select the correct fixings for the task at hand and ensure you are using the appropriate fixings for your specific nail gun to prevent injury.
5. Learn how to strip and maintain the nail gun properly, including using the correct air pressure and lubricating oil.
6. When carrying out maintenance, reloading nails, or changing settings, always disconnect the nailer from the air line before proceeding.
7. Operate the nail gun only in single-fire (semi-automatic) mode. Do not use bump or automatic modes.
8. Never leave the nail gun or stapler plugged into the air line when not in use. Always disconnect and store the tool properly.
9. Learn how to use the depth stop feature when using the nail gun to control the depth of the nails.
10. Do not use other body parts such as knees or feet to support work when using the nail gun. Use proper supports and fixtures.
11. Only trained personnel are authorized to use the nail guns and staplers. Notify a supervisor or manager immediately if someone untrained attempts to use these tools.

By signing the training acknowledgement, you confirm that you have received the necessary training, understand the usage instructions, and will wear the required personal protective equipment (PPE) when using the machinery. If you encounter any issues or require further training, inform your supervisor or manager promptly.

The authorized trainer has confirmed that they have provided the necessary training, ensured the understanding of usage instructions, provided required PPE equipment, and authorized your use of the machinery.

Safe System of Work

OPERATING AND SAFETY INSTRUCTIONS

OPERATING AND SAFETY INSTRUCTIONS AIR OPERATED NAIL GUNS AND STAPLERS
Name:
Training Date:

 | Instruction| Understood

---|---|---
1| Explained that safety equipment must be used at all times and why – goggles and ear protection must be provided and used.|
2| Explained particular care must be taken on where you place your hands when firing a nail into timber.|
3| Explained to be aware of your surroundings and make sure there are no hazards/people present in close proximity when using nail gun.|
4| Explained that under no circumstances is an operator to engage in horseplay and/or purposely act in a dangerous manner while using a

nailer/stapler. This would be classed as gross misconduct and further action from the police may follow.

|
5| Explained how to select the correct fixings for the appropriate task in hand and which fixing particular guns use, to avoid injury.|
6| Explained how to strip and maintain a nailer, using the correct air pressure and lubricating oil.|
7| Explained how to carry out maintenance/reloading nails/changing settings and that this is to be done only after the nailer has been disconnected from the air line.|
8| Explained that only single fire (semi-automatic) operation is to be used whilst operating the nail guns. Do not use bump or automatic

modes.

|
9| Explained never to leave a nail gun/stapler plugged into the air line ready to be fired. Always disconnect and put tool away.|
10| Explained how to use the depth stop when using nail gun.|
11| Explained never to use other body parts such as knee or feet to support work when using the nail gun|
12| Explained that only trained personnel are to use nail guns and staplers. All personnel must notify a supervisor or manager immediately of anyone using these items who has not been trained.|

I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.

Name:
Signed:
Date:

I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they require further training. I authorise this person to use the machinery detailed above.

Name:
(Authorised Trainer)
Signed
Date:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>