BULOVA 66X-3-R01 Dial Stainless Steel Watch Instruction Manual
- June 17, 2024
- Bulova
Table of Contents
Instruction Manual
OPERATING INSTRUCTIONS
I. To Start The Clock
To access the movement, please open the hinge at the 3 o’clock position at the
front of the dial. Insert a fresh, good quality “AA” size battery into the
battery compartment with polarity as indicated. II. To Set Time
Turn the hand set knob, in rear of movement, in the direction as indicated
until the desired time is obtained on the dial.
Il. To Activate LED Light
Your clock has a backlight dial using LED’s. The On / Off / dimmer selector
switch is located at the bottom of the clock.
This touch switch offers the following options: on (100% light) 50% dim, 25%
dim and completely off. To power the LED’s please plug in the supplied power
cord (located at the bottom of the clock) into a wall outlet. This will allow
the back light dial to remain on for extended periods. General Notes
- To clean the outside surfaces, use a clean, dry soft cloth to wipe away finger prints. Do not use any solvents or abrasive cleaner / polish.
- Use the rear hand set knob to set time and do not touch or move hands manually.
- Replace the battery if the timekeeping becomes erratic as this may be an indication of battery exhaustion.
- If the clock is a wall mounted clock it must be mounted to the wall with a mounting device that will support the weight of the clock.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>