Plastica SSW PUMP 08 Half Mask Instructions
- June 13, 2024
- Plastica
Table of Contents
Plastica SSW PUMP 08 Half Mask
Product Information
The AVIVA 40/50 Half Mask is a safety equipment designed to protect the user’s respiratory system during work activities. It is used in conjunction with the appropriate filters to provide effective filtration based on the specific job requirements.
Product Usage Instructions
- Ensure that safety equipment relevant to the job is used at all times for personal safety.
- Show how to install the filter correctly. Select the appropriate filter based on the job requirements.
- Inspect the straps and head harness for any damages or wear. Replace if necessary.
- Hold the mask and place your chin into the chin flap. Position the mask over your nose.
- Place the harness onto the crown of your head. Tighten the straps, ensuring they are not twisted. Fasten the buckle, keeping it central to the neck.
- Perform positive and negative pressure tests as per the manufacturer’s instructions to ensure proper seal and functionality.
- Once all checks are completed, you are ready to start work while wearing the AVIVA 40/50 Half Mask.
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if needed and will immediately inform the Supervisor or Manager if there are any issues with the machinery.
Name: [Enter your name]
Signed: [Enter your signature] Date: [Enter the date]
I confirm that I have trained the aforementioned person and that they fully understand how to use the above mask, have received the required PPE equipment, and know to inform me immediately of any issues with the equipment or if they require further training. I authorize this person to use the equipment detailed above.
Name: [Enter authorized trainer’s name]
Signed: [Enter authorized trainer’s signature] Date: [Enter the date]
Safe System of Work
AVIVA 40/50 HALF MASK FITTING AND TESTING INSTRUCTIONS TO BE USED WHILST PRODUCING INSTAFOAM
Name: ……………………………………………………….. Training Date:……………………………..
| Instruction| Understood
ü or X
---|---|---
1| Explain that safety equipment relevant for the job to be carried out must
be used at all times and why.|
2| Show how to install filter correctly and the correct filter for the job to
be carried out.|
3| Check straps and head harness are in good condition.|
4| Hold the mask and place your chin into the chin flap, place the mask over
your nose.|
5| Place the harness onto the crown of your head, tighten the straps ensuring
they are not twisted, fasten the buckle keeping the buckle central to the
neck.|
6| Carry out positive and negative pressure tests as per the manufacturer’s
instructions|
7| Once all checks are carried out you are ready to start work|
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.
Name: ………………………………………………………………………………………………………….
Signed: ……………………………………………………………….. Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully understand how to use the above mask, have received the required PPE equipment and know to inform me immediately of any issues with the equipment or if they require further training. I authorise this person to use the equipment detailed above.
Name: ………………………………………………………………………………….(Authorised Trainer)
Signed …………………………………………………………………… Date: ……………………………
SSW PUMP 08 03/09/20