Plastica SSW MOU 7 Chop Saw Instructions
- June 13, 2024
- Plastica
Table of Contents
Plastica SSW MOU 7 Chop Saw
Product Information
The product is an extruder machine with a calibrator attachment. The calibrator is used to shape and size the extruded material. The machine requires proper safety precautions and training for operation.
Product Usage Instructions
- Ensure that safety equipment is worn at all times when operating the machine.
- Before starting the machine, confirm that a safety check has been completed and signed off. If not, consult a Manager or setter before switching on the machine.
- To change the calibrator, remove the six 5mm Allen bolts and nuts that attach the calibrator to the vacuum bath.
- Obtain the correct calibrator for the new setup.
- Polish and clean the calibrator before inserting it onto the vacuum bath.
- Insert the calibrator into the vacuum bath, ensuring that the seal is attached to the calibrator before attachment.
- Use the six 5mm Allen bolts and nuts to securely attach the calibrator to the vacuum bath.
- Clean the inside of the vacuum bath before starting the machine.
- Only operate the machine if trained and authorized by a Manager.
By signing below, you acknowledge that you have received the necessary training and understand how to use the machinery. You agree to wear the required personal protective equipment (PPE) and take necessary safety measures. If further training is required or if there are any issues with the machinery, you will inform the Supervisor or Manager immediately.
Name: [Insert Name]
Signed: [Insert Signature] Date: [Insert Date]
I, as an authorized trainer, confirm that the aforementioned person has been trained on how to use the machinery, provided with the required PPE equipment, and understands the procedure. I authorize this person to use the specified machinery.
Name: [Insert Trainer’s Name]
Signed: [Insert Trainer’s Signature] Date: [Insert Date]
Safe System of Work
OPERATING AND SAFETY INSTRUCTIONS FOR CHANGING CALIBRATOR ON EXTRUDER 1
Name: ……………………………………………………….. Training Date:……………………………..
Instruction
| Instruction| Understood
---|---|---
1| Explain that safety equipment must be used at all times and why – safety
boots must be used at all times when running machines|
2| Before operating a machine clarify that safety check has
been completed and signed off, if not see a Manager or setter before switching the machine on.
|
3| Remove the six 5mm Allen bolts and nuts that attach the calibrator to the
vacuum bath, remove the calibrator.|
4| Obtain correct calibrator for new set up, calibrator Must be polished and
cleaned before inserting onto vacuum bath.|
5| Insert the calibrator into the vacuum bath, make sure the seal is attached
to the calibrator before attachment.|
6| Use the six 5mm Allen bolts and nuts to attach the calibrator to the vacuum
bath.|
7| Clean inside vacuum bath before starting machine.|
8| Do not use any machine unless trained and authorised by Manager.|
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.
Name: ………………………………………………………………………………………………………….
Signed: ……………………………………………………………….. Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they require further training. I authorise this person to use the machinery detailed above.
Name: ………………………………………………………………………………….(Authorised Trainer)
Signed …………………………………………………………………… Date: ……………………………
SSW MOU 7 19/11/15
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>