Plastica SSW MOU 1 Air Gun Instructions
- June 13, 2024
- Plastica
Table of Contents
Plastica SSW MOU 1 Air Gun
Product Information
The Leister Air Gun is a powerful tool designed for shrink-wrapping pipe- fitting packs. It is equipped with safety features to ensure safe operation. Please read and understand the following operating and safety instructions before using the Leister Air Gun.
Operating and Safety Instructions:
- Always use safety equipment while operating the machine.
- Inspect the electric cable for any damage before using the Leister Air Gun. If any damage is found, report it to your Manager or Setter, and DO NOT USE the machine.
- Turn on the Leister Air Gun using the isolator switch located above the gun.
- When the operation of the Leister Air Gun is required, turn it on using the switch located at the side of the green handle. Ensure that the electric cable is not close to the nozzle gun.
- After running the Leister Air Gun for 20 seconds, you may begin shrink-wrapping. Keep the Leister Air Gun in the provided holster while heating and only remove it when shrink-wrapping pipe fitting packs.
- Hold the Leister Air Gun only by the green handle. Do not touch the nozzle as it will be extremely hot and may cause burns.
- While shrink wrapping, move the Leister Air Gun around the intended pipe fitting pack. If you need to touch the pack, use the alley rod provided. Do not touch the pack for 20 seconds. Once the pack is cold, you may attach a label.
- Do not use the Leister Air Gun unless you have been trained and authorized by your Manager.
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the Leister Air Gun and take all necessary steps to ensure my own safety. I will ask for further training if needed and will immediately inform the Supervisor or Manager of any issues with the machinery.
- Name: [Your Name]
- Signed: [Your Signature] Date: [Current Date]
I confirm that I have trained the aforementioned person and that they fully understand how to use the Leister Air Gun. They have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they requirefurther training. I authorize this person to use the Leister Air Gun as detailed above.
- Name: [Authorized Trainer’s Name]
- Signed: [Trainer’s Signature] Date: [Current Date]
Safe System of Work
OPERATING AND SAFETY INSTRUCTIONS FOR LEISTER AIR GUN
- Name: …………………………………………….………….
- Training Date:…..…………………………
Instruction
| Instruction| Understood
or
---|---|---
1| Explain that safety equipment must be used at all times and why – safety
boots must be used at all times when running machine.|
2| Before operating Leister, inspect the electric cable for any damage, if
cable is damaged report this to Manager
or Setter and DO NOT USE.
|
3| Turn on Leister using isolator switch located above gun.|
4| When operation of the Leister is required turn on using switch at the side
of the green handle. Make sure electric cable is not close the nozzle gun.|
5| When Leister has been running 20 seconds shrink wrapping may begin, Leister
MUST be kept in holster provided whilst heating, only to be removed when
shrink wrapping pipe fitting packs.|
6| Only hold the Leister with the green handle. Do not touch the nozzle as
this will be extremely hot and will burn.|
7| Whilst shrink wrapping move the Leister around the intended pipe fitting
pack, if you need to touch the pack use alley rod provided, do not touch pack
for 20 seconds. When pack is cold a label may be attached.|
8| Do not use any machine unless trained and authorized by Manager.|
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.
- Name: ………………………………………………………………………………………………………….
- Signed: ………………………………………………………………..
- Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they require further training. I authorise this person to use the machinery detailed above.
- Name: …………………………………………………………………….……………(Authorised Trainer)
- Signed ……………………………………………………………………
- Date: ……………………………
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>