Plastica SSW MOU 2 Chop Saw Moulding Machines Instructions
- June 13, 2024
- Plastica
Table of Contents
Plastica SSW MOU 2 Chop Saw Moulding
Product Information
This user manual provides operating and safety instructions for molding machines. It includes guidelines for safe usage, the importance of using safety equipment, and the necessary steps to ensure personal safety while operating the machinery.
Product Usage Instructions
- Always use safety equipment when running the machines.
- Before operating the machine, ensure that a safety check has been completed and signed off. If not, consult a Manager or setter before switching the machine on.
- Familiarize yourself with the location of the red emergency stop button and know when to use it.
- Understand the general process of operating the molding machine when running in semi-auto mode.
- If trimming moldings, only use the provided safety de-burring tool.
- If shrink wrapping, refer to the relevant instruction/safety sheet.
- Do not leave the machine unless authorized by a Manager or setter.
- Do not use any machine unless you have been trained and authorized by a Manager.
By signing the training confirmation section below, you acknowledge that you have received the necessary training, fully understand all the points explained, and will comply with the safety guidelines provided. You also agree to wear the required PPE equipment while using the machinery and to inform your Supervisor or Manager immediately if any issues arise or if further training is required.
Training Confirmation
- Name: [Your Name]
- Signed: [Your Signature]
- Date: [Current Date]
I confirm that I have trained the individual mentioned above. I certify that they fully understand how to use the specified machinery, have been provided with the necessary PPE equipment, and know to inform me immediately of any issues or training requirements regarding the machinery.
- Name: [Authorised Trainer’s Name]
- Signed: [Trainer’s Signature]
- Date: [Current Date]
Safe System of Work
OPERATING AND SAFETY INSTRUCTIONS FOR MOULDING MACHINES
- Name: …………………………………………….………….
- Training Date:…..…………………………
|
Instruction
| Understood
---|---|---
1| Explain that safety equipment must be used at all times and why – safety
boots must be used at all times when running machines|
2| Before operating a machine clarify that the safety check has been completed
and signed off, if not see a Manager or setter before switching the machine
on.|
3| Explain where the red emergency stop button is and when to use it.|
4| Explain the general process of operating the molding machine when running
semi-auto.|
5| If trimming mouldings only use the safety de-burring tool provided.|
6| If shrink wrapping read relevant instructions/safety sheet.|
7| Do not leave the machine unless authorized by the Manager/setter.|
8| Do not use any machine unless trained and authorized by Manager.|
I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.
- Name: ………………………………………………………………………………………………………….
- Signed: ………………………………………………………………..
- Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment, and know to inform me immediately of any issues with the machinery or if they require further training. I authorize this person to use the machinery detailed above.
- Name: …………………………………………………………………….……………(Authorised Trainer)
- Signed ……………………………………………………………………
- Date: ……………………………
SSW MOU 2 – 28/09/15
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>