Plastica SSW MOU 24 Chop Saw Instructions

SSW MOU 24 Chop Saw

Product Information

The product is a vacuum bath extruder used for making pipes. It
is equipped with a water flow system to ensure proper functioning.
The user manual provides instructions on resolving low-pressure
water problems that may occur during operation.

Product Usage Instructions

1. Ensure that you are wearing safety boots at all times when
   operating the machine.

2. Before starting the extruder to make pipes, check if the water
   flow on the vacuum bath is free flowing.

3. If you are not obtaining a constant fast flow, there may be a
   blockage in the fittings. Follow the instructions below to unblock
   them.

4. Lift the lid of the vacuum bath, specifically the first
   section, using the correct sized spanner.

5. Remove the first two rows of fittings. If any fitting is
   blocked, gently blow it out with an air gun while wearing
   appropriate PPE equipment.

6. Once the fitting is free from dirt or obstructions, insert it
   back into the vacuum bath.

7. Turn on the water and vacuum spray. The flow should have
   increased now, indicating successful unblocking.

8. Proceed with pipe start up once the flow has improved.

After reading and understanding these instructions, sign the
training confirmation form provided. Ensure that you wear the
required PPE equipment and inform your supervisor or manager
immediately if there are any issues with the machinery.

Safe System of Work RESOLVING LOW PRESSURE WATER PROBLEM ON THE VACUUM BATH
EXTRUDER ONE

Name: ……………………………………………………….. Training Date:……………………………..

Instruction

Understood or X

1

Explain that safety equipment must be used at all times and why ­

safety boots must be used at all times when running machines

2

Before starting up the extruder to make pipe, check to see if the

water flow on the vacuum bath is free flowing.

3

If you are not obtaining a constant fast flow the fitting may be

blocked, you can easily unblock these fittings. (instructions below)

4

Lift the lid on the vacuum bath, the first section only ,using the

correct sized spanner, remove the first two rows of the fittings, if the

fitting is blocked blow it out gently with the air gun, PPE equipment

must be used.

Once the fitting is free from dirt or obstructions, insert the fittings

back into the vacuum bath. Turn on the water and vacuum spray,

the flow should have increased now, proceed with pipe start up.

I have received the above training and fully understand every point that was explained to me. I confirm that I will wear the required PPE equipment when using the above machinery and take all steps to ensure my own safety. I will ask for further training if I need to and will immediately inform the Supervisor or Manager if there are any issues with the machinery.

Name: ………………………………………………………………………………………………………….

Signed: ……………………………………………………………….. Date:…………………………………

I confirm that I have trained the aforementioned person and that they fully understand how to use the above machinery, have received the required PPE equipment and know to inform me immediately of any issues with the machinery or if they require further training. I authorise this person to use the machinery detailed above.

Name: ………………………………………………………………………………….(Authorised Trainer)

Signed …………………………………………………………………… Date: ……………………………

SSW MOU 24 18/01/22

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>