STEELGREEN SG46 35 Gallon Tank Attachment Instruction Manual

STEELGREEN SG46 35 Gallon Tank Attachment

Product Information

The 35 Gallon Tank Attachment is a product offered by Steel
Green Mfg. It is compatible with Models SG46 and SG52. The tank
attachment is designed to be installed on a frame and used for
various applications.

Product Usage Instructions

1. Step One: Ensure that the tank attachment is placed on a level and stable ground.

2. Step Two: Disconnect the hoses from the hopper and connect them to the circulation fitting. Make sure to hold the hoses up to prevent oil spillage.

3. Step Three: Disconnect the cables from the dash.

4. Step Four: Ensure that the hopper is empty before proceeding.
   Remove the six bolts that hold the hopper assembly to the frame and
   lift the hopper assembly from the frame.

5. Step Five: (No instructions provided in the manual)

6. Step Six: Remove the two bolts that secure the gas tank support
   and attach the valve assembly to the left side of the upright.

7. Step Seven: (No instructions provided in the manual)

8. Step Eight: (No instructions provided in the manual)

9. Step Nine: (No instructions provided in the manual)

10. Step Ten: (No instructions provided in the manual)

Note: For a complete list of parts and their descriptions, refer to the Parts List section of the manual.
If you have any further questions or need assistance with the installation or usage of the 35 Gallon Tank Attachment, please contact Steel Green Mfg. at (765)-481-2890 or visit their website at www.steelgreenmfg.com.

PARTS DESCRIPTION

INSTALLATION INSTRUCTION

STEP ONE:

• Disconnect the battery, ground first and then power wire.
• Remove the battery from the battery box.
• STEP TWO: Disconnect the hoses from the hopper and connect them to the circulation fitting.
• NOTE: Hold the hoses up to prevent oil spillage
• STEP THREE: Disconnect the cables from the dash.
• NOTE: Be sure the hopper is empty before proceeding.
• STEP FOUR: Remove the six bolts that hold the hopper assembly to the frame and lift the hopper assembly from the frame.

STEP FIVE:

• Set the 35 gallon tank assembly on the frame.

• Attach it to the frame with the six bolts.

• STEP SIX: Remove the (2) bolts that secure the gas tank support and Attach the valve assembly to the left side of the upright.

NOTE:

• Before beginning step seven, BE SURE there is no pressure on the lines and fluid is drained.
• Parts removed for clarity.

STEP SEVEN:

• Remove the knee pad to access the return & suction lines.
• Carefully cut and install the “tee” fittings in the “suction” and “return” lines as shown (blue arrows). Securely fasten with 3/4 hose clamps.

PARTS LIST

ITEM| QTY| PART NUMBER| DESCRIPTION
1| 4| 12HS| HOSE CLAMP, 3/4
2| 2| S50062| TEE FITTING, 3/4 HOSE

STEP EIGHT:

• Cut and install 3/4” suction hose, connecting one end to the suction fitting on the top valve and the other end to the “tee” fitting in the suction line.
• Cut and install 3/4” return hose, connecting one end to the return fitting on the bottom valve and the other end to the “tee” fitting in the return line.
• Securely fasten each end with 3/4” hose clamp.
• STEP NINE: Connect the “quick disconnect” hoses from the tank to the valves.
• The top valve is SUCTION.
• The bottom valve is RETURN.

STEP TEN:

• Set the battery in the battery box.
• Reconnect the battery cables, power cables, and wires first followed by the ground wire.
• Attach the battery box cover and bungee strap.
• Steel Green Mfg.
• 824 S State Road 39 Lebanon, IN 46052
• (765)-481-2890 www.steelgreenmfg.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>