ledix TETI 230 V AC LED Lighting Instruction Manual
- June 3, 2024
- ledix
Table of Contents
ledix TETI 230 V AC LED Lighting
LED lighting fitting
- Supplied by 230 V AC
- Mounting in a Ø60
- junction box
- Mounting indoor only
Application:
- supplied by 230 V AC 50/60 Hz
- easy mounting in a Ø60 junction box
- excellent lighting parameters obtained by applying high quality LEDs
- light colour repeatability
- high luminous flux at minimum power consumption
- high manufacturing quality and reliability with an estimated durability of five years of continuous lighting (~40 000 h).
TECHNICAL PARAMETERS
| Power consumption | 1,1 W – white cold; 0.93 W – white warm |
|---|---|
| white cold | white warm |
| Colour rendering index Ra | 71 |
| Colour temperature TC [K] | 5900 |
| Luminous flux Ø [lm] | 22 |
| Luminous efficiency [lm/W] | 31 |
MOUNTING
CAUTION! Connection of this device to a single-phase installation must be installed in accordance with standards valid in a particular country. Installation, connection and control should be carried out by a qualified electrician staff, who act in accordance with the service manual and the device functions.
TETI fitting is designed to be used in a Ø60 junction box.
- Disconnect power supply by the phase fuse, the circuit-breaker or the switch-disconnector combined to the proper circuit.
- Check if there is no voltage on the connection cables by means of a special measuring equipment.
- Remove the casing – to do it hold the control module with one hand, next move the fitting upward (as shown in the figure) and pull it gently out of the mounting element.
- Disconnect the wires connecting the fitting and the control module.
- Connect the device cables with the control module terminals in accordance with the installing diagram (wiring diagram example).
- Mount the control module in a Ø60 junction box and tighten the fixing elements.
- Connect the fitting cables with cables of the module mounted in the Ø60 junction box.
- Mount the front of the fitting.
- Switch on the power supply from the mains.
- Check if the fitting works properly
INSTALLATION EXAMPLES
WARRANTY CARD
- ZAMEL Sp. z o. o. assures a 5 years guarantee for the product.
- The manufacturer’s guarantee does not cover any of the following actions:
- a) mechanical damage during transport, loading / unloading or under other circumstances,
- b) damage caused by incorrect product mounting or misuse,
- c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices required for the product functioning,
- d) damage caused by Act of God or any other incidents independent of the manufacturer – ZAMEL Sp. z o. o.
- e) power supply sources (batteries) included in the device when sold (if included).
- The PURCHASER shall lay any claims in writing in the place of purchase or to ZAMEL Sp. z o. o.
- ZAMEL Sp. z o. o. is liable for processing any claim according to current Polish legislation.
- ZAMEL Sp. z o. o. shall process the claim at its own discretion: product repair, replacement or money return.
- The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or otherwise are not affected by this warranty.
Zamel Sp. z o.o.
43-200 Pszczyna, ul. Zielona 27
tel : +48 32 449 15 00 , F ax: +48 32 449 15 02
E-mail : ledix@ledix.pl,
www.ledix.pl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>