RUGGED RIDGE 2003-2006 Neoprene Seat Cover Instruction Manual
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 2003-2006 Neoprene Seat Cover
Product Information
- Product Name: Rear Seat Neoprene Seat Cover
- Model: IS-NRSC-01
- Parts Included
- Rear seat upper neoprene seat cover section
- Rear seat lower neoprene seat cover section
Product Usage Instructions
- Set the cover sections out to identify the upper from the lower section.
- The upper sections can be identified by looking at the slit sewn in for the release lever on the top upper section of the seat (if applicable).
- Install the upper section first.
- Open the flaps on the bottom of the upper cover section.
- Slide the upper section over the top of the upper section of the seat.
- Push the lower front side flaps between the upper and lower sections of the seat.
- Flip the seat forward and connect the bottom flaps from the front and rear of the cover to each other using the attached Velcro.
- Flip the seat back into a locked position.
- Slide the lower section cover onto the bottom section of the rear seat.
- Push flaps between the upper and lower sections of the rear seat.
- Flip the seat forward.
- Use Velcro to attach to the bottom flaps of the lower seat section’s carpeted surface.
- Pull side flaps around the bottom section of the seat and use Velcro to attach to the side of the seat.
- Flip the seat back into a locked position.
- Use Velcro along the front of the lower cover section to attach to the underside of the lower seat section.
- Check fitment and Velcro connections.
- Loosen connections where neoprene is overstressed and adjust fitment as needed.
Parts included
- Rear seat upper neoprene seat cover section.
- Rear seat lower neoprene seat cover section.
Installation Instructions
- Step (1): Set the cover sections out to identify the upper from the lower section (a). The upper sections can be identified by looking at the slit sewn in for the release lever on the top upper section of the seat (if applicable).
- Step (2): The process will be easier if you install the upper section first. Begin by opening the flaps on the bottom of the upper cover section. Slide the upper section over the top of the upper section of the seat. (a, b).
- Step (3): Push the lower front side flaps between the upper and lower sections of the seat (a). Flip seat forward and connect the bottom flaps from the front and rear of cover to each other using the attached Velcro (b).
- Step (4): Flip seat back into locked position. Slide lower section cover onto bottom section of rear seat. Push flaps between the upper and lower sections of the rear seat. Flip seat forward. UseVelcro to attach to bottom flaps of lower seat section’s carpeted surface. Pull side flaps around bottom section of seat and use Velcro to attach to side of the seat (a). Flip seat back into locked position. Use Velcro along front of lower cover section to attach to underside of lower seat section (b).
- Step (5): Check fitment and Velcro connections (a,b). Loosen connection where neoprene is over stressed and adjust fitment as needed.
Contact
- 460 HORIZON DR. SUITE 400
- SUWANEE, GA 30024
- PHONE: 770-614-6101
- FAX: 770-614-6069
- info@omix-ada.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>