RUGGED RIDGE 11615.82 Fender Liners Rear JT Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 11615.82 Fender Liners Rear JT
Product Information
| Product Name | Fender Liners, Rear; JT |
|---|---|
| Part Number | 11615.82 |
Product Usage Instructions
- Remove the factory rear flare and wheel liner.
- Attach U-nuts to the outer six holes on the rear liners.
- Position the rear wheel liner on the vehicle.
- Using the supplied 10mm shield retainer, affix it to the vehicle along the back of the wheel well. (Driver Side Shown)
- Affix rear flares to the vehicle following the manufacturer’s instructions.
- Using the supplied M6 bolt and washer, affix the rear liner and flares to the vehicle.
Components
- Rear Liner, LH (1)
- Rear Liner, RH (1)
- U-nut (12)
- M6 Washer (12)
- M6 Bolt (12)
- 10mm Shield Retainer (6)
Installation Instructions
- Remove factory rear flare and wheel liner.
- Attach U-nuts to the outer six holes on the rear liners.
- Position rear wheel liner on vehicle. Using supplied 10mm shield retainer, affix to vehicle along the back of the wheel well.
- Affix rear flares to the vehicle following manufacture’s instructions.
- Using supplier M6 bolt and washer, affix rear liner and flares to vehicle.
Contact
- 460 HORIZON DR. SUWANEE, GA 30024
- PHONE: 770-614-6101
- FAX: 844-270-0593
- www.Omix-ADA.com
OMIX-ADA® TECHNICAL SUPPORT
- PHONE: M-F 8am – 5pm EST 1-800-449-6649
- FOR WARRANTY OR TECH CONCERNS EMAIL: webmaster@omixsupport.com
ATTN: STATE OF CALIFORNIA CONSUMERS
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Copyright © 2020 Omix-Ada®, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>