MSPD Fox 10.5 Inverter EPS Test Instructions

FOX 10.5 Update Instructions

Fox 10.5 Inverter EPS Test

Download the FOX Update zip file. Please note that the file name might very between FOX AIO and FOX 10.5. This update is for the Fox 10.5
Please ensure you have downloaded 7 Zip from https://www.7-zip.org/download.html or have WinZip on your computer.

Extract the zip file,

Insert a USB drive into your computer and copy the folder called update onto the USB (This is not the ZIP File) PLEASE ENSURE THAT ONLY THE UPDATE FILE IS ON THE USB. NO OTHER FILES, DOCS OR PHOTOSThen you can insert the USB into the USB port on the FOX, this port is also used for the WIFI Dongle.

And update Main CPU, then remove the USB,

• Reinsert the USB and update Slave CPU, then remove the USB,
• Reinsert the USB and update HMI,
• You are now ready to commission the system,

Please follow the Video links:

Fox 10.5 Inverter – Installer Commissioning Guide Video https://youtu.be/TMTOUUoAJac
How to connect your Fox 10.5 Inverter to your WiFi Hotspot https://youtu.be/AfHz863dpt4
How to create FoxESS Installer Account https://youtu.be/sBBIuw9HT4A

Firmware Upgrading

User can upgrade inverter’s firmware via a U-disk.

• Safety check
  Please ensure the inverter is steadily powered on.
  Inverter must keep the battery on through whole procedure of upgrading. Please prepare a PC and make sure the size of U-disk is under 32G, and the format is fat 16 or fat 32.
  Note: Please DO NOT apply USB3.0 on inverter USB port, the inverter USB port only support for USB2.0.

• Upgrading steps:
  Step 1: Please contact our service support to get the update files, and extract it into your U-disk as follow:
  update/master/ KH_E_Master_Vx.xx.bin
  update/slave/ KH_E_Slave_Vx.xx.
  bin updatelmanagerl KH_Manager_Vx_xx_E.bin
  Note : vx.xx is version number.
  Warning : Make sure the directory is in accordance with above form strictly! Do not modify the program file name, or it may cause the inverter not work anymore!
  Step 2: Unscrew the waterproof lid and insert U-disk into the “USB- port at the bottom of the inverter. Step 3: The LCD will show the selection menu. Then press up and down to select the one that you want to upgrade and press -OK’ to confirm to upgrade.
  Step 4: After the upgrade is finished, pull out the U•disk. Screw the waterproof lid.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>