RUGGED RIDGE 11230.21 Elite Headlight Guard Kit Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
Elite Headlight Guard Kit
11230.21 Elite Headlight Guard Kit
- Left Elite Headlight Guard
- Right Elite Headlight Guard
Components
(1) 3. M6 Button Head Bolt
(1)
-
Raise hood and remove (6) plastic fasteners on top of grille. First pull up on center pin, then pull up on entire plastic retainer assembly.
-
Pull bottom of grille away from vehicle to disengage metal clips on bottom rear of grille. Remove factory grille from vehicle.
NOTICE It may be necessary to remove winch or other bumper mounted accessories prior to removing factory grille. -
Remove factory headlight bolts. Then use supplied M6 Button Head Bolts to attach Elite Headlight Gaurd. Next, reinstall grille, see steps 1 and 2.
460 HORIZON DR.
SUWANEE, GA 30024
PHONE: 770-614-6101
FAX: 770-614-6069
www.omix-ada.com
OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F 8am – 5pm EST 1-800-449-6649
| TICKET: www.omixsupport.com
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Copyright © 2017 Omix-Ada®, Inc.
References
- OMIX Jeep Replacement Parts - OEM & Vintage Aftermarket Jeep Parts | Omix
- Omix-ADA & Rugged Ridge Support System
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>