RUGGED RIDGE TJ-LJ Dash Multi Mount System Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE TJ-LJ Dash Multi-Mount System
Product Information
| Component | Quantity |
|---|---|
| Multi-Mount Tray | 1 |
| Universal Ball Mount | 1 |
| Cap Piece | 1 |
| Self-Tapping Screw | 3 |
Product Usage Instructions
- Remove all items and clean the vehicle dash recess.
- Test fit the Multi-Mount Tray in the dash recess. The multi-mount Tray should sit at the rear-most wall of the dash recess.
- Remove the backing of the adhesive tape and place the Multi-Mount Tray into the dash recess.
- Install three Self-Tapping Screws through the Multi-Mount Tray into the dash recess in the vehicle, starting with the front-most Self-Tapping Screw.
Four Configurations for Dash Multi-Mount System
- No Accessory
- Phone/GPS Mount Only
- Camera/Tripod Mount Only
- Phone and Camera Mount
Shown with Rugged Ridge Phone Mount (Part #13551.13)
Product overwiew
Components
- Multi-Mount Tray (1)
- Universal Ball Mount (1)
- Cap Piece (1)
- Self-Tapping Screw (3)
- Remove all items and clean vehicle dash recess.
- Test fit Multi-Mount Tray in dash recess. Multi-Mount Tray will sit at rear-most wall of dash recess.
- Remove backing of adhesive tape and place Multi-Mount tray into dash recess.
- Install three Self-Tapping Screws through Mutli-Mount Tray into dash recess in vehicle, beginning with front-most Self-Tapping Screw.
Four Configurations for Dash Multi-Mount System:
Shown with Rugged Ridge Phone Mount (Part #13551.13)
- No Accessory
- Phone/GPS Mount Only*
- Camera/Tripod Mount Only
- Phone and Camera Mount*
- 460 HORIZON DR. SUITE 400
- SUWANEE, GA 30024
- PHONE : 770-614-6101
- FAX : 770-614-6069
- info@omix-ada.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>