RUGGED RIDGE 13551.14 Overhead Storage Console Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 13551.14 Overhead Storage Console
Product Information
The Overhead Storage Console is designed for use with YJ, TJ, and JK models. It provides additional storage space inside thevehicle and is mounted above the visors, resting on the roll bar. The console comes with all the necessary hardware for installation, including mounting brackets, bolts, washers, nuts, long Velcro straps, and short Velcro straps.
- Contents:
- Storage Console
- Mounting Brackets (2)
- M8 Bolt (4)
- M8 Flat Washer (4)
- M8 Nut (4)
- Long Velcro Strap (4)
- Short Velcro Strap (1)
- Part Number: 13551.14
- Manufacturer: Omix-ADA
- Address: 460 Horizon Dr., Suwanee, GA 30024
- Phone: 770-614-6101
- Fax: 844-270-0593
- Website: www.Omix-ADA.com
Product Usage Instructions
- Locate the mounting holes at the ends of the Storage Console. Position the Mounting Bracket above the mounting holes with the slots facing forward. Attach the Mounting Bracket to the Storage Console using the supplied M8 hardware (M8 Bolt, M8 Flat Washer, M8 Nut).
- Place the Storage Console inside the vehicle, ensuring that the mounting brackets rest on the roll bar. The Storage Console should sit just above the visors. Insert Long Velcro Straps through the slots in each Mounting Bracket and strap them tightly around the roll bar on both sides of the vehicle.
- Insert the Short Velcro Strap through the slot in the rear of the Storage Console and attach it to the footman loop of the windshield.
Overhead Storage Console
Contents/Quantity
- Storage Console (1)
- Mounting Brackets (2)
- M8 Bolt (4)
- M8 Flat Washer (4)
- M8 Nut (4)
- Long Velcro Strap (4)
- Short Velcro Strap (1)
INSTALLATION
- Locate the mounting holes at the ends of the Storage Console. Position Mounting Bracket above the mounting holes with the slots facing forward. Attach the Mounting Bracket to the Storage Console using the supplied M8 hardware.
- Place the Storage Console inside the vehicle such that the mounting brackets rest on the roll bar. The Storage Console should sit just above the visors. Insert Long Velcro Straps through the slots in each Mounting Bracketand strap them tightly around the roll bar on both sides of the vehicle
- Insert the Short Velcro Strap through the slot in the rear of the Storage Console and attach to the footman loop of the windshield.
460 HORIZON DR.
SUWANEE, GA 30024
PHONE : 770-614-6101
FAX : 844-270-0593 www.Omix-
ADA.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>