RUGGED RIDGE 11226.05 Elite Tail Light Guard Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 11226.05 Elite Tail Light Guard Installation Guide
-
Remove hardware from tail lights and disconnect from vehicle wiring harness.
-
Remove rear trim piece from both tail lights.
-
Encase tail light inside Housing and Guard using M5 Screws.
-
Reconnect tail light to vehicle wiring harness.
-
Secure assembly to vehicle using #6 Screws in remaining attachment points.
Copyright © 2015 Omix-Ada®, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>