MuxLab 500530 USB 3.2 Gen1 4 Port Extender Kit User Manual

: July 3, 2024
: MuxLab

Table of Contents

MuxLab 500530 USB 3.2 Gen1 4 Port Extender Kit
Product Usage Instructions
FAQ
Safety Precautions
Introduction
Features
Package Contents
Specifications
Operation Controls and Functions
Receiver Panel
Application Example
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MuxLab 500530 USB 3.2 Gen1 4 Port Extender Kit

Product Usage Instructions

To ensure optimal performance, carefully read all instructions before using the device. Store this manual for future reference.
The USB 3.2 Gen1 4-Port Extender Kit allows the extension of USB 3.0 connectivity up to 100m over CAT6a cable. It supports data transfer rates of up to 5Gbps and is backward compatible with USB 2.0 and USB 1.1.
Hardware acceleration for isochronous and bulk transfer
USB-A ports support different power outputs
Supports RS-232 pass-through and FSYNC GPIO pass-through
Supports bi-directional 24VDC PoC
No driver or setting installation required

FAQ

Q: Is the USB extender compatible with Mac computers?
A: Yes, as long as the Mac computer has a USB-A port and meets the system requirements for USB 3.0 connectivity.
Q: Can I use this extender with other types of cables?
A: The extender is designed specifically for use with CAT6a cables for optimal performance.

Safety Precautions

To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for future reference.

Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other hazards.
To prevent fire or shock hazards, do not expose the unit to rain, or moisture and do not install this product near water. Keep the product away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on the housing, unplug the module immediately.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Using supplies or parts not meeting the product specifications may cause damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
Install the device in a place with adequate ventilation to avoid damage caused by overheat.
Unplug the power when left unused for a long time.
Information on disposal of devices: do not burn or mix with general household waste, please treat them as normal electrical waste.

Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or translated without the express permission of MuxLab Inc. Product specifications and information in this document are for reference only, and the content may be updated from time to time without prior notice.

Introduction

The USB 3.2 Gen1 4-Port Extender Kit, 100m (model: 500530) enables USB 3.2 Gen1 connectivity at data rates up to 5Gbps & extends true USB up to 100m (328ft) over standard Cat6a UTP. The transmitter features one USB 3.2 Gen1 Type B input, one FSYSNC GPIO input, and one RS-232 pass-through. The receiver features four USB 3.2 Gen1 Type A outputs, one FSYSNC GPIO output, and one RS-232 pass-through. The device also supports 24V Bi-directional PoC.
The USB 3.2 Gen1 4-Port Extender Kit, 100m is true plug and play, requires no additional software drivers, and is compatible with all major operating systems. The unit supports a wide variety of USB extension applications including security, industrial control, digital signage, scientific data acquisition, and other implementations of USB standards.

Features

Extension of USB 3.0 up to 100m/328 ft over CAT6a cable
USB 3.2 Gen1 connectivity with data transfer rate up to 5Gbps
Backward compatible with USB 2.0 and USB 1.1
Hardware acceleration for isochronous and bulk transfer
USB-A port 1 and 2 support 5VDC/1.5A, port 3 and 4 support 5VDC/1A on the Receiver
Support RS-232 pass-through and FSYNC GPIO pass-through (for industry camera use)
Support bi-directional 24VDC PoC
Simple plug and play, no driver and setting installation required.

Package Contents

One (1) USB 3.0 Extender (Transmitter)
One (1) USB 3.0 Extender (Receiver)
One (1) 24VDC/2A Locking Power Supply Two (2) 4pin-3.5mm Phoenix Connector (Male) Four (4) Mounting Ear
Eight (8) Screw (KM3*4)
One (1) User manual (available via download)

Notes: Confirm that the product and accessories are all included. If not, please contact the supplier from which you purchased the unit.

Specifications

Technical

USB Protocol

| ****

USB 3.2 Gen1

---|---
Transmission Rate| Up to 5Gbps
Network Bandwidth| 10G
Transmission Distance| 100m/328ft over CAT6a (F/FTP) cable
ESD Protection| IEC 61000-4-2:

±8kV (Air-gap discharge), ±4kV (Contact discharge)

Connection|
Transmitter| Input: 1 × USB HOST [USB-B, 9pin Female]

Output: 1 × HDBT OUT [RJ45, Female]

Control: 1 × RS-232 [3pin-3.5mm Phoenix Connector] 1 × FSYNC [1pin-3.5mm Phoenix Connector] 1 × SERVICE [USB-C,Update Port]

Receiver| Input: 1 × HDBT IN [RJ45, Female]

Output: 4 × USB Devices [USB-A, 9pin Female] Control: 1 × RS-232 [3pin-3.5mm Phoenix Connector]

1 × FSYNC [1pin-3.5mm Phoenix Connector]

1 × SERVICE [USB-C, Update Port]

Output: 24VDC/2A