FONESTAR STM-7512N Full Motion Monitor Mount For 2 Monitors Instruction Manual
- June 13, 2024
- Fonestar
Table of Contents
STM-7512N
FULL MOTION MONITOR MOUNT FOR 2 MONITORS
INSTRUCTION MANUAL
IMPORTANT
- Follow the installation recommendations in the instruction manual.
- To ensure that the mount holds the maximum weight, the installation surface must be completely flat, firm and resistant.Never force the screen into position with the locking screws tightened.
- FONESTAR does not hold itself responsible for damages or breakages resulting from the mount falling apart because it was incorrectly attached, or handled incorrectly.
ACCESSORIES INCLUDED
ASSEMBLY INSTRUCTIONS
Please note that the brackets installed on the arms are rotated 45º, to continue with the installation you will need to place them in their upright position as shown in the pictures.
CAUTION: install the same monitors on the stand, otherwise the weight of the stand may unbalance the stand. Also, while installing one monitor on one arm, another person should hold the other arm to keep the stand stable.
CAUTION: do not rotate the display beyond the range indicated by the arrow to prevent the weight from being unbalanced and causing the stand to tip over with the monitors installed.
CAUTION: while making adjustments to one monitor, another person must hold the other monitor to keep the stand stable.
NOTE: if the display does not stop in the desired position, tighten the screw as indicated.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>