Intermec CK71 Handstrap Replacement Kit Instructions
- June 13, 2024
- Intermec
Table of Contents
Intermec CK71 Handstrap Replacement Kit
Product Information
The CK70 | CK71 Handstrap Replacement Kit (P/N 203-948-001) includes five handstraps and five pins. It is designed to replace the handstrap of the CK70 and CK71 devices. The kit does not include the Magstripe Reader Adapter (P/N 850-547-xxx), which is sold separately.
Product Usage Instructions
- Ensure that you have the Handstrap Replacement Kit (P/N 203-948-001) and the CK70 or CK71 device.
- If you also have the Magstripe Reader Adapter (P/N 850-547-xxx), make sure it is available for installation.
- Remove the existing handstrap from the CK70 or CK71 device by following the device’s user manual instructions.
- Take one of the handstraps from the Handstrap Replacement Kit and align it with the handstrap attachment points on the device.
- Insert one of the pins included in the kit through the holes on the handstrap and into the corresponding holes on the device. Repeat this step for all five handstraps.
- If you have the Magstripe Reader Adapter, attach it to the device according to its user manual instructions.
- Verify that all handstraps are securely attached to the device.
- Test the functionality of the handstraps by holding the device with them.
Note: For further information or troubleshooting, refer to the CK70 or CK71 device user manual.
Contact Information For any inquiries or assistance, please contact Intermec at:
- Tel: 425.348.2600
- Fax: 425.355.9551
- Website: www.intermec.com
INSTALLATION
Handstrap Replacement Kit P/N 203-948-001 includes five handstraps and five pins. Magstripe Reader Adapter (P/N 850-547-xxx) sold separately.
CK70 and CK71 Handstrap Replacement Kit Instructions
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
© 2011 Intermec Technologies Corporation. All rights reserved.
Downloaded from Arrow.com.