Intermec CN50, CN51 AD27 Single Dock Instructions

June 3, 2024
Intermec

Intermec CN50, CN51 AD27 Single Dock

Intermec CN50, CN51 AD27 Single Dock

CN50 and CN51 Single Dock (AD27) Instructions

The CN50/CN51 single dock (Model AD27) powers your CN50 or CN51 computer and charges a spare battery (1015AB01 for CN51, and AB24 or AB25 for CN50) separately. The single dock also provides client and host USB connectivity.

What You Need

You also need these items (sold and ordered separately):

  • Use only UL Listed power supply, which has been qualified by Intermec with output rated at 12 VDC and 2.5 A with the device.
  • An appropriate AC power cord
  •  Ethernet or modem adapter and cables (optional)

Install and Use the Dock

  1. Connect the power supply to the power connector on the back of the dock. Note: Use the optional strain relief hardware to secure the power supply cable to the dock.
  2. Connect the power supply to AC power.
  3. Place the computer or a spare battery pack in the dock. The dock can charge a computer and a spare battery pack at the same time.

The computer battery status LED indicates the battery charge level. For more information, see the computer user manual. The Battery Pack Status LED on the dock indicates the spare battery charge level

Battery Pack Status LED Descriptions

  • Red: The battery is charging.
  • Green: The battery is fully charged.
  • Yellow: The battery is out of charging temperature range. To ensure proper battery charging, the operating range for the AD27 is 5 °C to 35 °C (41 °F to 95 °F).
  • Alternating red and yellow:
    • The battery is not charging. Try these solutions
    • Make sure the battery is firmly installed in the charger.
    • Make sure the charging pins on the single dock and the contacts on the battery are clean
    • If these solutions do not work, the battery may be defective.
  • Off:
    • No battery is installed.
    • The charger is not receiving power. Make sure the power plug is firmly inserted in the charger and the power supply is properly connected to a powered AC outlet.

(Optional) Connect USB devices to the dock through the USB client or USB host ports.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Intermec User Manuals

Related Manuals