SmallRig V10 4177 Furry Wind Screen For Canon Power Shot User Manual
- June 13, 2024
- SmallRig
Table of Contents
SmallRig V10 4177 Furry Wind Screen For Canon Power Shot
In order to ensure user’s safety and prevent the product damages caused by any improper use, please carefully read the “Warnings” below and properly keep this User Manual for future reference.
Foreword
Thank you for purchasing SmallRig’s product.
Warnings
- Please read this User Manual carefully.
- Please keep this User Manual. Always keep this User Manual when passing the products on to the third party.
- Heed all warnings and follow all instructions in this User Manual.
Intended Use
- The user has read the instructions of this manual.
- The user is using the product within the operating conditions and limitations described in this User Manual.
- “Improper use” means using the products other than as described in these instructions or under operating conditions which differ from those described herein.
In the Box
-
In the Box Windscreen × 2
-
Circular Mounting\ Plate for Windscreen × 2
-
User Manual × 1
Instruction Installation for Furry Windscreen
- Install the Circular Mounting Plate
Step 1: Tear off the sticker on the bottom of the Circular Mounting Plate ②
Step 2: Align the Circular Mounting Plate ② with the microphone of the camera
to install
The package do not include the camera
1. Note：1. Before installing the Circular Mounting Plate ② , please make sure the top of the camera is clean and non-dust
2. The bottom of the Circular Mounting Plate ② is made of removable glue, so it can be used again by washing\ if it loses its stickiness after repeated use- Install the Furry Windscreen
Align the furry windscreen ① with the top of the Circular Mounting Plate ② to install
Specifications
Circular Mounting Plate Dimensions: 15 × 15 × 1.5mm
Furry Windscreen Dimensions: 45 × 45 × 25mm
Product Weight: 5g
Material(s): Polyester、Stainless Steel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>