Eagle Lights 9500B-FTS LED Fork Light Cover Instruction Manual
- June 13, 2024
- Eagle Lights
Table of Contents
Eagle Lights 9500B-FTS LED Fork Light Cover
Product Information
The 9500B-FTS is a fork LED light designed for installation on motorcycles. It provides turn signal and running light functions, enhancing visibility and safety on the road. The product is manufactured by Eagle Lights LLC, a reputable company in the automotive lighting industry.
Product Usage Instructions
- Read the installation instructions carefully and make sure you understand them before proceeding.
- Before starting the installation, disconnect the negative battery terminal to prevent electrical shock. Ensure that the bike is parked on a level surface.
- Remove the bolts from the windshield, and then remove the windshield itself. Set it aside.
- Remove the dash cover and place it to the side.
- Remove the speaker covers and bolts holding on to the fairing, as well as the bolts to the turn signal bracket.
- Remove screws holding in the headlight. Unplug the headlight and set it aside. Remove the side bolt.
- Place foam on the inside of the new fork LED light. Align it onto the forks. Using the bolt removed from the previous step, attach the fork LED light to the bike.
- Route the wiring from the fork LED light up into the space for the headlight.
- Connect the larger plug of the fork LED light to the headlight plug.
- Disconnect the turn signal wiring for now.
- Replug in the headlight and reinstall it.
- Connect the turn signals from the fork turn signal to the turn signal wiring on the bike.
- Test the turn signal and running light functions to ensure they are working properly.
- Reinstall the fairing, dash cover, and windshield.
If you encounter any difficulties during the installation or have any questions, please contact Eagle Lights LLC at 1-800-921-3162 or email [email protected] for assistance.
Installation Warning
If you feel uncomfortable installing this product, we recommend having a professional complete the installation. Eagle Lights LLC is not liable for any damage to the product or vehicle due to an improper installation. If you have questions about the installation, please feel free to call us at 1-800-921-3162 or email us at [email protected].
Installation
Please ensure you have read through the instructions and understand them clearly before attempting the installation.
WARNING!
- To prevent possible electrical shock, disconnect the negative battery terminal before installing this product. Park the bike on a level surface.
- Remove bolts from the windshield. Remove the windshield and place it to the side.
- Remove the dash cover. Place it to the side.
- Remove the speaker covers.
- Remove the bolts holding on the fairing and the bolts to the turn signal bracket.
- Remove screws holding in the headlight. Unplug the headlight and place it to the side. Remove side bolt.
- Place foam on the inside of the new fork LED light.
- Align on to the forks. Using the bolt removed from the previous step, attach the fork LED light to the bike.
- Route the wiring from the fork LED light up into the space for the headlight.
- Connect the larger plug to the headlight plug.
- Disconnect the turn signal wiring. Leave disconnected for now
- Replug in the headlight.
- Reinstall the headlight.
- Connect the turn signals from the fork turn signal to the turn signal wiring on the bike.
- Test turn signal and running light functions
- Reinstall the fairing, dash cover and windshield.