UCOMX PW0075 Wake Up Light Wireless Charging Station User Manual

UCOMX PW0075 Wake Up Light Wireless Charging Station

• Please read the user manual carefully before using the product

Function Introduction

1. Lighting Mode

2. Alarm Clock

3. Clock

4. + Add

5. – Decrease

6. Light Switch

7. Display

8. Watch Charging Position

9. Cellphone Charging Position

10. Earbuds Charging Position

11. Click to switch the light colour. A total of 7 colours are white, orange, pink, blue, red, red-blue mix, and red-white mix. Note that I I is the light on/off button.

12. : Click to enter the alarm clock setting mode. “hour area” in the display blinks, click [+] or -] to adjust the hour, click again for confirmation and automatically enter the minute setting interface;-“minute area” in the display blinks, click [+] or [-] to adjust the minute, click I ] again means the alarm setting is completed;

    • If there is no key action within 10 seconds when setting, the current setting will be saved automatically, and the “alarm indicator” on the right side of the display will light up;
    • During the process of the alarm ringing, tap the top of the device to enter snooze mode, the interval time between snoozing is 10 minutes, and the alarm will ring again after 10 minutes;
    • During alarm/snooze, long press and touch the alarm button to cancel the alarm;
    • In normal standby mode, long press to turn off the alarm setting, and long press again to turn on the alarm setting.
    • The wake-up light will light up three minutes before the alarm clock rings.

13. : Click to enter the time setting mode.

    • The “hour area” in the display is blinking, click [+] or [-] to adjust the hour, click or confirmation, and automatically enter the minute setting interface;-In the display, “minute area” flashes, click [+] or -] for minute adjustment, click  for confirmation, time setting is finished; Setup interface, no operation of a key in 10 seconds, save the current setting automatically.

14. : This is a multi-function composite key, in the clock setting, and alarm setting, click [+], and the corresponding value increases; light opens state, click [+] then the light increases bright, a total of three gears.

15. : This is a multifunctional composite button, in the clock setting, alarm clock setting, click -], the corresponding value decreases; light open state, click -] Then the light is dimmed, a total of three gears.

16. Light switch: Click to switch on/off the light.

17. Watch charging area: the watch is placed in the area, and the watch begins to charge.

18. Cell phone charging area: The cell phone was placed in the region, the the phone began to charge.

19. Headset charging area: The headset is placed in the area, and the headset begins to charge.

If the accessory is damaged, you can contact us for a free return or exchange!

ANY OTHER QUESTIONS?
Your satisfaction is always our top priority. Please feel free to contact us through the following steps:

1. Log in to your Amazon account.
2. Open your purchased orders.
3. Click the store name next to”Sold by:”
4. Click “Ask a question”.

Customer Service Email

• Lilimlssllc@hotmail.com

System Specifications

• Model: PW0075
• Input Load: 9V/3A
• Output Load:
• Up to 10W/7.5W/5W For Cellphone
• Up to 3W For Earbuds
• Up to 2.5W For Watch
  FCC ID: 2BBEH-PW0075

Compatibility Sheet

Smartphone

• iPhone 15,iPhone 15 Plus,iPhone 15 Pro,iPhone 15 Pro Max,
• iPhone 14,iPhone 14 Plus,iPhone 14 Pro,iPhone 14 Pro Max,
• iPhone 13 mini,iPhone 13,iPhone 13 Pro,iPhone 13 Pro Max,
• iPhone 12 mini,iPhone 12,iPhone 12 Pro,iPhone 12 Pro Max

Smart Watch
iWatch 2/3/4/5/6/7 /8/9/SE/SE 2/Ultra/Ultra 2

Earbuds

• AirPods 2/3/Pro/Pro2

Package Contents

• 1 wireless Charger
• 1 x30W Adapter
• 1 x User Manual
• 1 xUSB-C to USB-C Charging Cable {1.2M)

Notes (mandatory reading)

1. Update the device to the latest system.
2. Make sure your device supports wireless charging.
3. Make sure to use the original charging cable and adapter.
4.  Avoid thick device covers.
5.  Please put the phone/watch at the centre of the charge area.
6.  When the phone or watch cannot be fully charged, try the following: Open[Settings]-[Battery Health]-[Turn off battery optimization).
7.  When the earphones are exhausted and cannot be charged, please take out the earphones and charge the storage compartment separately.
   • The lower the temperature, the faster the charging speed. The charging speed is faster in winter than in summer.
8. Please don’t charge in high-temperature and humid environments to avoid damage to the circuit.
9. Don’t use or place the product at high temperatures or expose it directly to the sun.
10. Don’t immerse the product in water or near ignition sources.
11. Please put your smart devices at the centre of the charger area.
12. There are multiple versions of the AirPods 2, with the A2897 and A1602 charging compartment models not supporting wireless charging capabilities.
13. Please set the alarm 6 minutes in advance, otherwise, the lights will not come on properly.
14. You must wait for the current alarm to ring before setting the next new alarm, otherwise, it will affect the wake-up light and the alarm program.
15.  After setting the alarm, please check whether the display’s [Alarm Clock] is on, otherwise, you need long press 3s to turn it on.

About the FCC
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This device complies with part 15 of the FCC rules, operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, this can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>