UCOMX D18ZFkdOwHL Nano Magnetic 2 in 1 Wireless Charger User Manual

June 13, 2024
ucomx

2-in-1 Wireless Charger

User Manual

Packing List

2-in-1 Wireless Charger

18W Adapter        USB-A to USB-C Charging Cable (1 m)

Product Description
  1. Phone charging location
  2. Charging indicator
  3. USB-interface
  4. Watch charging location
Specification Yield

Model: W203
Input: 5V/3A 9V/2A
Output: 10W/7.5W/5W/2.5W

Compatible Models

1. For iPhone
iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 mini, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max

2. For AirPods
AirPods 2, AirPods 3, AirPods Pro, AirPods Pro 2

3. For iWatch
iWatch 2/3/4/5/6/SE/7/8/SE 2/Ultra

ANY OTHER QUESTIONS

Your satisfaction is always our top priority. Please feel free to contact us through the following steps:

  1. Log in to your Amazon account.
  2. Open your purchased orders.
  3. Click the store name next to “Sold by”.
  4. Click “Ask a question.”
Customer Service Email

Lilimlssllc@hotmail.com

How to Use the Products

1. Charge the phone: Connect the charging head to the wireless charging input Type-C port, the wireless charging indicator blue light is on for 3 seconds. The wireless charger enters standby state, put the phone in the wireless charging area, the indicator light is blue and always on, indicating that the phone is charging normally. The phone is full, the blue light is off, if the phone is charging abnormally, the blue light flashes rapidly.

UCOMX D18ZFkdOwHL Nano Magnetic 2 in 1 Wireless Charger
3

2. Watch charging: Please put the watch module up and place the watch in the wireless charging area of the watch to align with the magnet, you can see the charging indication of the watch display light up. The charging indication on the watch display lights up, indicating that the watch is charging normally.

UCOMX D18ZFkdOwHL Nano Magnetic 2 in 1 Wireless Charger
4

Warm Tips

Please pay attention to the following issues, otherwise it may cause irregular charging, high charging temperature, intermittent charging, or even no charging.

  1. Not compatible with devices other than Apple, such as Samsung.
  2. Please place your phone/watch/ in the correct charging area.
  3. The charging distance is 2-8 mm, please do not wear a protective cover thicker than 3 mm.
  4. No metal or magnetic objects in the center 6 cm of the back of the phone during charging.
  5. The lower the temperature, the faster the charging speed.
  6. Charging speed is faster in winter than in summer.
  7. Please do not charge in a hot and humid environment to avoid damaging the circuit.
  8. Please put it out of reach of children to avoid unnecessary accidents.
  9. Make sure to use the original charging cable and adapter.
About the FCC

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device complies with part 15 of the FCC rules operation is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received including interference that may cause undesired operation.

FCC Warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

However there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals