UCOMX W312 Nano 3 in 1 Wireless Charger User Manual

Wireless Charger
Three-in-one Charger User Manual

Function Introduction

1. After connecting to the power supply, the blue indicator ights up, and automatically turns off after three seconds, and the charging board enters the standby state.
2. The mobile phone with wireless charging function is placed on the charging board, and the LED indicator lights up.
3. When the blue indicator lightis on, it the normal charging state.
4. When there are foreign objects, high temperature, low temperature, temperature, over voltage, over current, etc theindicator light wil flash,
5. Take off the devices light turns off.

System Specifications

Model: w312
Input: SV/3A 9V/2A
Output: 7.5W/5W/2.5W(For iWatch)

Compatibility Sheet

1. Smartphone
   iPhone 15Phone 15 Plus Phane 15 ProPhone 15 Pro Max,
   iPhone 14Phone 14 Plus iPhone 14 ProPhone 14 Pro Max,
   iPhone 13 miniPhone 13,Phone 13 Pro,Phone 13 Pro Max,
   iPhone 12 mini Phone 12,Phone 12 ProPhone 12 Pro Max

2. Smart Watch
   Watch 2/3/4/5/6/7/8/3/SE/SE 2/Ultafitra 2

3. Earbuds.
   AirPods 2/3/ProfPro2

Package Contents

1xWireless Charger
1x18W Adapter
1xUser Manual
1xUSB-A to USB-C Charging Cable (1M)

Precautions for Use

Ploase pay attention to the following issues, otherwise. itmay cause abnormal charging, igh charging temperature, Intermitient charging, or even not charging.

1. Not compatible for devices other then Appl, such as Samsung.
2. d0 n0t pull the sicone part,otheruise it wil easly damage the precison components under the slcone part and affect the charging.
3. Please put the phone/watch al the center of charge area.
4. We recommend fast charger adapter (9V/2A) which can charge three devices at the same time while maintaining the fastest speed. The 5V/2A charger can only provide anormal charging speed, which will be slower than that of a fast charger.
5. The charging distance is 2-8 mm, please don’t wear protective case which is over 3mm thick.
6. The watch has temperature control When thetemperature reaches 104 F, it will stop charging automatically.If the temperature is normal, it will continue to charge.
7. No metal or magnetic objects around 6em of the back center of the phone during charging.
8. The lower temperature, the faster charging speed.The charging speed is faster in winter than in summer.
9. Please don’t charge in high temperature and humid environments to avoid damage of circuit,
10. Putitat the place that children can’t each to avoid unnecessary accidents.

Troubleshooting

1. Update the device to the latest system.
2. Make sure your device that supports wireless charging.
3. Make sure to use the original charging cable and adapter
4. Avoid thick device covers.
5. Avoid high ambient temperatureoptimal temperature is 82-86°F.
6. When the phone or watch cannot be full chargedry the following:OpeniSettings]-(Battery Health]-{Turn off battery optimization),
7. When the earphones are exhausted and cannot be charged, please take out the earphones and charge the storage compartment separately.
8. When the blue light flashes,indicating abnormal charging please check whether there are foreign objects around.

ANY OTHER QUESTIONS?

Your satsfaction s always our top priority. Please feel free to contact us through the following steps:

1. Log in to your Amazon account.
2. Open your purchased orders.
3. Click the store name next to’Sold by:”
4. Click *Ask a question”.

Customer Service Email

Liimissllc@hotmail.com

About the FCC
This equipment complies with FCC radiation exposre limits set forth for an uncontrolled environment, This equipment should be installed and operated vith minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules, operation s subject to the following two conditions:

1. this device may ot cause harmiulinterference.
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These lmits are designed to provide reasonable protection against harmfulinterference in aresidentia installation. This equipment generates uses and can radiate radio frequency energy and, f not installed and used in accordancewith the nstructions, may cause harmil interference to radio communication.
However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmiul interference to radio o television reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference. by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>