ucomx G56 Sports Bluetooth Wireless Headphone User Manual
- June 5, 2024
- ucomx
Table of Contents
ucomx G56 Sports Bluetooth Wireless Headphone
WEARING METHOD
ACCESSORIES LIST
**FUNCTION INDICATOR
**
PRODUCT INFORMATION
- Headphone type: running sports bluetooth headset
- Impedance:320
- Sensitivity: 97dB
- Frequency response range:20HZ-20KHZ
- Effective distance: about 10 meters
- Battery capacity: 120mAh, 3.7 V
- Battery type: Rechargeable polymer lithium battery
- External voltage: DC4.8-5.5 V
- Support Protocol: A2DP/HFP/HSP/IAVRCP
BASIC FUNCTIONS
Power on once
In the off state, press and hold the multi-function button for 2 seconds, the
blue light flashes and the headset is turned on
Power off
In the power-on state, press and hold the multi-function button for 3 seconds,
the red light is on for 1 second, and the headset is turned off.
Pairing mode
In the off state, long-press the multi-function button for 5 seconds, the
headset is turned on until the red and blue lights are alternately flashing
and pairing. Turn on the phone Bluetooth, search for the device “AirWings” and
cick on it, when you hear the connected tone, The headset is connected to the
phone successfully.
Call Answer
answer the call. , short press the multi-function button to
Call hang up
During a call, short press the multi-function button to hang up the call.
Call reject
press and hold the volume -” button for 2 seconds to reject the call.
Switching music
Press and hold the volume “+” button for 2 seconds during music playback to
switch the next song. Press and hold the volume “” button for 2 seconds to
switch the previous song.
Playing/Pausing Music
When the music is paused, press the multi-function button briefly to play the
music When the music is playing, short press the multi-function button paused.
Night running LED
In the power-on connection state, press the MFB key for 4 on or off the night
running LED.
Volume Control
When talking or listening to music, press the volume “+” button to increase
the volume,press the volume “-” button to reduce the volume.
EQ switch
In listening mode, double-click the MFB to switch between dynamic mode and
standard mode.
Switching between Chinese and English:In the pairing (but not connected to the
device) state, long-press the volume key” for about 5 seconds to switch
between Chinese and English voices. Voice assistant: When the earphone is
connected and in the standby state, long-press the MFB for about 2 seconds to
open the voice assistant (such as Siri). Clear pairing information (reset): In
the charging status, press and hold the multi-function button for 5 seconds to
clear the pairing information and the headset will turn off Low-power alarm:
When the battery voltage is lower than 3.3V in the power-on state, there will
be a low-power voice prompt
Charging status: when the earphone is charged by USB, the red ight of the
earphone is always on. When the earphone is fully charged, the blue light is
on.
SAFETY PRECAUTION
- Do not detach or modify the earphone, otherwise, it might get damaged or malfunction. Defectives under this category are not included for the warranty.
- Do not expose the device to water or other liquid, otherwise, it might get damaged or malfunction. Defectives caused by liquid inside are not included for the warranty.
- Do not expose the earphone in extreme humidity or extreme temperatures (below 0 °C or above 45°C).
- Avoid putting the indicator light near children’s eyes or animal eyes.
- Do not use the earphone in thunderstorm weather which might cause malfunction and increase the risk of electric shock.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference toradio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>