HUDSON VALLEY KBS1745201 Piton Table Lamp Instruction Manual
- June 13, 2024
- HUDSON VALLEY
Table of Contents
HUDSON VALLEY KBS1745201 Piton Table Lamp
Product Information
The product is the Hudson Valley Lighting fixture, specifically the Piton KBS1745201 model. Hudson Valley Lighting is a part of the Hudson Valley Lighting Group, which also includes Troy Lighting, Mitzi, and Corbett Lighting. This fixture is designed for indoor use and is suitable for residential and commercial spaces. It provides functional lighting with a modern design. You can find more information about this product and other offerings from Hudson Valley Lighting Group at www.hvlgroup.com.
Product Usage Instructions
- Screw the bulb (C) into the socket. Make sure to use a T PE A lamp with a wattage that does not exceed the recommended limit.
- Plug the cord (D) into a wall outlet.
- Turn on the switch (A) located on the shade (B) to activate the light.
Note: This fixture is rated for 0 watt T PE A lamps. It is important not to exceed the recommended wattage to ensure safe usage and prevent damage to the fixture.
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
- UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
FIXTURE INSTALLATION
- Screw the BULB (C) into the socket. THIS FIXTURE IS RATED FOR 60 WATT TYPE A LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
- Plug the CORD (D) into the wall outlet. Turn the SWITCH (A) on the SHADE (B).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>