Dr meter S10 Soil Moisture Meter User Manual
- June 13, 2024
- Dr meter
Table of Contents
Dr meter S10 Soil Moisture Meter
Instructions
1. Remove stones, leaves, grass, etc. from the surface of the soil;
2. Insert probe deeply into soil reaching root level, keep probe close to
plant;
Important Notes
- The indicator will not move if the soil is too dry;if that, water the soil and test it after 15-20 minutes.
- Wipe the probe metal surface with a soft cloth before measuring.
- Do not leave the meter in the soil for over 1 hour.
- Do not use it to test water or other liquid. The meter only can be used to measure soil.
- Remove probe from soil and wipe clean after each use.
- Refer to the chart on the package for your plant’s watering needs.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>